How to paint mink at home. Dyeing of products made from natural and artificial fur

Fur, like human hair, tends to fade in the sun: fur collars and hats, after a certain amount of wear, lose their brightness of color or acquire a copper tint. To restore the former brightness of colors to your favorite collar, you don’t have to turn to specialists; you can get by with your own efforts.

How to dye fur at home?

Of course, many are interested in how to dye natural fur, for example, mink or arctic fox. Fur is similar in structure to human hair, so the procedure for coloring it will be very similar to coloring hair at home.

To dye fur you will need:

• dye. It is better to choose high-quality, expensive paint; it will last longer and will not stain the fur;
• salt – 2-3 teaspoons, ammonia – 1 teaspoon, detergent – ​​1 teaspoon, baking soda – 1 teaspoon, 1 liter of water. The solution obtained by mixing these ingredients is used to clean fur before dyeing. Before you dye the fur of an arctic fox, mink, or any other fur, you should clean it of grease and dirt, otherwise the paint will not stick and all your efforts will be in vain;
• fatty cream (or glycerin) - it is used to treat the inside (the skin on the back of the product) in order to avoid it from drying out;
• vinegar – will be needed for rinsing fur after dyeing.

Staining procedure:

1. Washing fur. The above alkaline solution is applied with a brush, then rinsed and dried naturally. Fur may shrink after washing, so it is better to stretch it on a wooden board and secure it with pins (or nails).
2. Direct staining carried out quickly, on pre-moistened pile. The paint lasts as long as indicated on the box.
3. After coloring The fur is kept in warm water with vinegar and dried without using a hair dryer. To prevent the product from shrinking, it is also attached to the board with the fur facing up. The fur takes the longest to dry, so do not rush to remove the product from drying if it seems that the fur is already dry.

Many people are interested in how to dye white mink fur themselves. Unfortunately, dyeing with blonde paints can lead to the appearance of unwanted shades, which will be very difficult to get rid of. Therefore, it is better to take a white fur coat or collar that has changed color to the dry cleaner, where it will be returned to its original appearance.

Natural fur coat - refers to image clothing. Such things are bought for more than one season. Time and cleaning make the fur dull, light colors turn yellow, dark colors fade. It is possible to restore the tone by painting. This is carried out in special workshops, sometimes the service is provided by dry cleaners. Regardless of the high price, they may refuse you if the fur, in their opinion, is worn out. More often than not, people are simply too lazy to do such work; it is much easier to refresh the shade of a collar or hat. Working with outerwear is responsible and takes a lot of time. The solution is simple; you can dye your fur coat yourself.

Before painting, you need to determine whether the product was previously tinted (during production). Mink has the most varied natural color in the elite segment. It can be black, mahogany (brown), walnut, pearl, silver. The naturalness of the shade is easily determined. If the down is lighter than the spine, the core is plain and white, the product has not been tinted. Even color is a sign of artificiality. The inside of the skin will also be dark. Products that have previously been processed require special care.

It is recommended to choose the desired color a couple of shades darker than the actual one. It is not recommended to lighten dark colors. Multi-colored rabbit or previously dyed colored materials may produce unexpected, undesirable results. White fur coats are tinted twice.

Stages of work on how to dye a fur coat at home

1. Buy hair dye at the grocery store. Don’t skimp, choose a durable, well-proven one. If the clothing area is large, take several packages. It is with this paint that you can give faded fibers a new color and shine. If the kit does not include a balm for colored hair, you will also have to buy it.
2. Prepare the item thoroughly before painting. Clean from dust and grease. To do this, you can use one of the solutions:
- 1 liter of water, 1 dessert spoon of salt plus the same amount of soda, 10 drops of ammonia (ammonia);
- equal proportions of water, vinegar, alcohol;
- water with shampoo.
Moisten the cloth. Wipe the fur. Without rubbing, in one direction. Rinse off any remaining detergent.
3. The inside of the item is thoroughly coated with glycerin or a very rich cream. The base will not be saturated with water.
4. Wear protective gloves.
5. Read the instructions on the paint you purchased. Follow the recommendations when mixing ingredients.
6. Using a wide brush, apply the mixture to the pile, using a wide-toothed comb and using your hand, distribute the mixture evenly. To paint paired elements, dilute the paint once.

Clue

Prepare more mixture; paint applied at different times from different boxes may have a different shade in the future.

7. Follow the instructions for the time required
8. Rinse off the coloring composition with running water. You need to do this together. Do not soak your fur coat in water. While holding the clothes hanging, rinse the pile thoroughly.
9. To fix the color, rinse in cold water with vinegar (while watering the fur, try not to let the fur become limp).
10. Apply conditioner for colored hair. Leave for a couple of minutes and rinse. The fur will become soft and shiny, and the smell of vinegar will go away.
11. Allow excess liquid to drain. Fold the fur coat in half and place it on a wide support.
12. Treat the skin with glycerin a second time.
13. Lay out the clothes with the fur facing out. Use a backing made of dense fabrics that absorb moisture well. Change it every two hours at first, then as needed.

Smooth and comb the product. Dry in a dry, ventilated place. Away from artificial heat sources and direct sunlight. The process takes 3 - 5 days.

Be patient. Rapid drying will cause the skins to shrink.

A strictly maintained painting process guarantees an excellent result.

Arctic fox fur products, just like diamonds, are girls' best friends. Spectacular arctic fox fur coats and coats, original vests are liked by all ladies without exception. They not only keep you warm in the harsh Russian winters, but also look royal.

Despite the fact that the wear resistance of the Arctic fox is very high, its color gradually loses its intensity. The colored Arctic fox becomes dull over time, and the white one turns yellow. The good news is that restoring the presentable appearance of arctic fox products is quite simple with the help of coloring. You can resort to the services of a studio, but it is much more economical to dye arctic fox fur at home.

Features of self-dying

Furriers believe that, unlike others, the fluffy and dense Arctic fox is the most practical to work with. The dyes apply smoothly and last a long time. The main thing is to strictly follow the instructions that we have compiled taking into account the recommendations of expert furriers.

Important nuance! Don't paint a new and expensive item at home just to get a different color. Paint products that you won’t mind if something happens: yellowed, faded, out of fashion, etc.

The process of updating the fur of the Arctic fox can be divided into several stages:

• Preparation;
• pre-cleaning;
• painting;
• consolidation;
• drying.

Let's look at each stage in detail.

Preparation

If you want to dye a collar that is sewn onto a coat or jacket, you need to carefully tear it off and sew it in place after all the manipulations. The lining of fur hats needs to be removed.

As for fur coats, it is quite difficult to dye large items well at home. To do this, you will have to separate it into separate skins, and then sew it back together. If a fur coat is valuable to you, it is better not to take risks. As a last resort, use a tinting spray.

Arctic fox fur cleaning

Existing dirt and greasy deposits must be removed, as they interfere with high-quality, uniform coloring. If you neglect this advice, the color in contaminated areas will turn out paler. A solution made from a mixture of the following components will help you clean natural fur at home:

• table salt - 2 tbsp. l.;
• mild detergent - 1 tbsp. l.;
• soda - 2 tbsp. l.;
• a few drops of ammonia.

Combine all ingredients, dilute in two liters of warm water. Treat pre-combed fur with the resulting composition.

Apply it with a brush, trying to distribute it evenly over the entire surface. Make sure to clean both the top and bottom of the fur, including the undercoat. Then wipe the pile with a damp sponge several times to remove the alkaline solution.

Light stains can be easily removed by pet shampoo, which can be purchased at a veterinary store. Dilute it with warm water, apply it to the product with a damp sponge and carefully clean. Then rinse off the soap mixture with a clean sponge.

The skin from the underside of the fur is called mezdra. It should not be wetted at this stage to avoid deformation. Before cleaning, lubricate the inside with glycerin to prevent it from getting wet.

Cleaning can be done much faster with the help of professional cleaning sprays, for example, the FURASOL brand.

How to dye arctic fox fur at home?

It is correct to start dyeing immediately after cleaning, since the dye adheres more softly to wet fibers.

Choosing paint

Dyes for natural fur are sold in leather goods, hardware or fur stores. If it is difficult to purchase a special dye, we recommend using regular hair dye of the desired shade. At the same time, color possibilities expand almost unlimitedly.

The Arctic fox's fur is quite dense. To get a rich color, you will need at least two packs of paint.

The basic rule is that fur should be dyed several shades darker than the existing one. We advise fans of colored fur items to pay attention to the fashionable wine, dark blue palette of shades.

Experts note that such fur dyeing at home will last from 6 to 12 months. Therefore, after one or two seasons the process will have to be repeated.

Attempt at writing

If you want to dye arctic fox fur for the first time, then to ensure a guaranteed result, it is advisable to conduct a test. This can be done on a small piece or in an inconspicuous place, such as inside pockets or on the hem of a sleeve. Don't forget to protect your hands with rubber gloves.

If you are satisfied with the result, proceed to coloring the entire product. It is best to apply the coloring composition to the fur with a hairdressing brush. Distribute it, painting each strand evenly. Exposure time may vary, follow package instructions.

Having analyzed the reviews of fans of fur dyeing at home, we can conclude that a stable result is obtained when using inexpensive hair dyes. Domestic coloring compositions are more variable in color range. Such paints provide a wide field for experimentation: you can hold them until the desired shade is achieved. Then the paint must be carefully washed off with water at a temperature of 30-40 °C.

Lock color

To fix the resulting shade, dilute 5 tablespoons of ordinary table 9% vinegar in 2 liters of water, and rinse the dyed fur in the resulting solution.

If you want to make your Arctic fox's fur fluffier and silkier, apply a balm for colored hair. Some manufacturers already have this balm in their packaging. Leave for a few minutes and rinse again with running water. Then blot the product thoroughly with a dry terry towel.

Drying

Do not forget to periodically comb the pile so that it does not bunch up in one direction. A downy cat brush is ideal for brushing.

If you are working with individual skins or a collar, then before drying they should be stretched on a wooden board, secured with pins. This is done so that the flesh does not shrink after getting wet.

The drying process will be completed when not only the pile is dry, but also the core. This usually takes 2-3 days. If you did everything correctly, the item will look like new.

Creative transformation of fur

After practicing with monochromatic coloring, experiment and paint the fur in a more original way. Let's look at how to get a spectacular leopard color that won't leave the fashion pedestal.

For coloring you will need two types of paint: black and brown. Additionally, you need to make a stencil from thick cardboard. Cut a pattern of asymmetrical holes in it. Place the stencil on the fur and paint the cut out areas brown as described above. The next step is to apply black highlights in the center of the brown spots.

If you want to get a spotted color, use hairdressing techniques for highlighting. For example, pre-wrap small strands of fur in foil.

Another effective option is to paint only the tips of the fibers. A rich shade will be obtained if you choose a tone lighter than the main one.

How to lighten arctic fox fur

This method is great for whitening yellowed Arctic fox items or making a dark Arctic fox lighter. To do this, you will need a hair bleaching compound or simple hydrogen peroxide. When using clarifiers, follow the instructions included with them.

Dissolve peroxide tablets in water, apply the solution to the fur and leave to act for 15 minutes. It is not advisable to leave it for more than a quarter of an hour, as the pile may thin out and become brittle.

Rinse the product and dry it. Then you can tint it to your desired shade. You should not lighten the fur of an arctic fox more than once, otherwise you risk damaging it irrevocably.

Grandma's recipe

Our grandmothers used this method to bleach yellowed fur when there were no ready-made dyes on sale. Its effect is based not on chemical reactions, but on an optical illusion and lasts “until the first snow.” Dilute a small amount of blue in warm water, wet the sponge and lightly walk through the pile. The result will appear after complete drying.

Express method

Specially designed fur dyes, which are available in aerosol form, will help you quickly refresh your fur product.

Using this spray can is quite simple. Keep it at a distance of 20-25 cm and spray one by one on individual strands. To prevent the pile from sticking together, periodically comb it with a comb.

Manufacturers position this treatment as tinting. Deep coloring cannot be achieved using this method. It is good when you do not want drastic changes, but want to disguise minor defects. For example, yellowed tips or spots. This can is also convenient for stenciling. The color range of coloring aerosols is classic: white, black, shades of brown and gray.

How to paint the interior at home?

It happens that the fur is so worn out in places that the light flesh is visible through it. In such cases, its color can also be adjusted. When it comes to leather, bald spots can be tinted with leather dyes. Don't forget to lubricate it with glycerin first. It is better to use special markers of the desired shade on the finished fur product.

You probably already realized that, with the exception of some details, dyeing arctic fox fur is no more difficult than dyeing hair. The same techniques are used: uniform application, holding, fixing, rinsing with balm.

In addition, you can control the shade yourself using a preliminary test. The color obtained after dyeing in the studio may pleasantly surprise you.

Numerous reviews from owners of “revived” furs indicate that you can update your winter wardrobe at home. Do not rush to give up on faded or boring items made from Arctic fox. Imagination and skillful hands will extend the life of expensive clothes and make your friends congratulate you on your new thing. Experiment and enjoy the warmth and beauty of your favorite things!

It is known that fur products look beautiful and luxurious and provide good warmth in the winter cold. Like any clothing, they lose their great appearance over time. If your favorite thing has faded or is simply boring, you can paint it at home without turning to specialists, thereby turning it into something new and unique.

How to dye arctic fox fur at home

Arctic fox fur lends itself well to dyeing. If you want to upgrade your Arctic fox item, you will need:

• hair dye;
• fatty cream (can be replaced with glycerin);
• hair balm;
• rubber medical gloves;
• a brush or an old toothbrush for applying the coloring composition;
• vinegar.

Your actions:

1. Lubricate the inside with cream.
2. Stretch the material on a flat surface and secure it.
3. Thoroughly moisten the previously cleaned surface with water.
4. Wear gloves and quickly apply the coloring compound, smoothing the pile with your hand.
5. Wait for the period of time specified in the dye instructions.
6. Rinse the lint under running warm water and rinse in a vinegar solution.
7. Treat the item with balm diluted in water and rinse.
8. Lubricate the inside again with cream, carefully stretch it, pin it with pins, and let it dry.

Dyeing a mink coat

The mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before you dye mink fur at home, prepare:

• hair dye;
• spray;
• a comb with fine teeth;
• shampoo;
• hair balm;
• fatty cream (glycerin is possible).

Your actions:

1. Clean the item from grease and dirt.
2. Treat the flesh with cream.
3. Prepare the coloring composition according to the instructions.
4. Lightly moisten the surface with water using a spray bottle.
5. Apply the dye to the pile with a spray bottle from a distance of 50 cm.
6. Even out the tone by combing the surface with a comb.
7. Wait half an hour.
8. Rinse off the coloring composition with warm water and shampoo.
9. Rinse with balm diluted in water.
10. Apply the cream to the flesh.
11. Lay out the product and leave it to dry.
12. Comb the fibers in the desired direction.

Fur cleaning

Before you dye your fur at home, you need to clean it. Paint particles have difficulty penetrating greasy, contaminated pile. Before dyeing a fur coat or other fur item, you should clean the product with an alkaline solution. To do this you will need:

• water – 1 l;
• salt – 2 tsp;
• ammonia – 1 tsp;
• detergent (dishwashing gel, washing powder) – 1 tsp;
• baking soda – 2 tsp.

Your actions:

1. Dissolve the ingredients in water, stir well until smooth.
2. Treat the flesh with a rich cream (possibly glycerin) to prevent drying out.
3. Apply the resulting solution evenly to the pile using a brush.
4. Rinse thoroughly under running water.
5. Lay the item out and let it dry at room temperature.

Coloring fur with hair dye

The structure of natural fur pile resembles human hair. Therefore, hair dye is suitable for home dyeing. This drug can be purchased at any supermarket or household chemical store. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give something a light shade, you need to bleach it by treating it with a solution of hydrogen peroxide. Dyeing fur with this product is simple and reminiscent of the procedure for coloring your own curls.

Spray for coloring fur

Another product intended for dyeing at home is a special spray. This product is used to add tint to long ends. The undercoat and undercoat are not affected. The dye dissipates at a distance of 60-70 cm. The can should be moved slowly and measuredly to distribute the substance evenly. The painted area should be combed immediately to remove excess product and prevent the fibers from sticking together.

Video: is it possible to dye a mink coat?

Dyeing fur with hair dye at home is now widespread. The fur of mink, khanorika, kolinsky, marten, muskrat and other animals can be painted with durable household cream paints. Currently, there are a large number of different cream paints on the market, prices range from several hundred to tens of rubles.

To dye fur, it is advisable to choose a paint that is not expensive, light-resistant and resistant to the aquatic environment. It is very convenient to paint small skins, pieces and ready-made fur caps for hats with such paints. One or two packs are required for one skin, depending on the size of the fur and the fur. Paint consists of the contents of two tubes: a tube of paint and a tube of oxidizing agent (peroxide). After mixing the contents of two tubes in a separate container, the paint is applied as a spread and rubbed into the fur with a swab.

When dyeing fur with oxidizing or acidic dyes, many inconveniences arise. For example, when painting with oxidizing dyes, it is not advisable to paint one or two skins or a sewn fur cap for a hat, since several components are required: black urzol for fur D, pyrocatechin or resorcinol, ammonia 25%, salt and oxidizing agent (perhydrol 30%). Before painting, the fur must be etched in a chromium paint in an acidic environment. The etching and painting processes are lengthy and take up almost the entire daylight hours; painting is carried out using the dip method in separate baths at a temperature of 35 -38 degrees.

When dyeing fur with acid dyes, the skins must be tanned with an increased amount of chrome tanning agent so that the skins do not cook. The temperature of the dye solution is 60 - 65 degrees.

It is not advisable to dye fur in small quantities; it is more economical to prepare a batch of skins and spend the entire daylight hours on dyeing.

When dyeing fur with hair dyes, everything is much simpler; you can dye one or two skins in 1 - 2 hours, using a spread method, rubbing the dye into the fur. This wastes one or two packs of paint. The costs are small.

What hair dyes can you use?

From a large number of household cream paints, you need to choose paints that provide dyed fur with good resistance to light, water and mechanical stress. When painting mink fur, depending on whether the fur is old or new, the paint consumption is small. If we need to dye skins with long-haired fur (Arctic fox, fox, silver fox or sable), paint consumption increases significantly, especially when dyeing light skins in dark colors and new fur. In this case, the issue of price is acute.

For dyeing mink, muskrat and other fur skins, the following stable household cream hair dyes have proven themselves to be effective: FARA, IMPRESION +, PRESTIGE. Dyed items retain color for 2–3 years, are not washed off with water, and are almost indistinguishable in color from natural, undyed skins.
Paints Fara, Impression, Prestige

Selection of shades for different fur colors

You need to dye the fur in a tone that will be an order of magnitude darker than the existing one. For example, if you need to dye brown mink fur, be sure to use a darker dye. FARA paint – dark brown No. 502 is suitable for natural brown mink. Mink fur, like any other, is dyed differently. New fur that has not been exposed to sunlight (new skins) dyes very poorly; you have to increase the concentration of dye by adding a darker one.

So, for example: you can add half a tube of black paint No. 501 to dark brown paint FARA No. 502. You can increase the concentration even more by adding half a tube of dark brown paint No. 502 to a tube of black No. 501.

New mink or muskrat fur does not dye well, so often after drying you have to re-dye it in the same way to achieve dark shades. Old (worn) fur of mink, muskrat and other animals, which has been exposed to sunlight, dyes much better and the longer the fur is worn, the more intense the color. Within 30 minutes to an hour, the skin is completely painted with dark brown FARA dye No. 502 or No. 501.
Tinted shampoo IRIDA

Light tones of fur, for example: gray or blue mink, are better tinted in the same tone with hair dye - IRIDA. For yellow or white mink it is also better to choose paint to match. After dyeing, the fur is renewed, the color becomes brighter and more saturated. Light new skins are difficult to dye in dark tones; it is often necessary to repaint them, increasing the concentration according to the method described above. There are no such problems with old light fur; it can be easily dyed black or brown.

It is better to tint long-haired fur (arctic fox, fox) in a natural color, choosing paint according to color. When painting in dark colors, and even when the skins are new, much more paint is used.

Preparing the product for painting

Fur skins, individual pieces or a finished sewn fur cap for a hat need to be prepared for painting. Fur pelts must first be tested for exposure to water. Fur, before dyeing, must be degreased and cleaned of dirt by washing. Then it is thoroughly washed in water, dyed, washed and washed again. Skins, due to long-term storage or wear, new skins due to improper dressing may lose their strength and, when exposed to water, swell and tear. That's why all skins need to be tested for water before painting. Separate pieces or thin places of the skin are soaked or thrown into a bowl with warm water and observed for 10 - 15 minutes; if nothing happens to the skins, they remain strong, such skins can be dyed. It happens the other way around: the skins swell, tear when stretched a little, and even worse, they become limp, like blotting paper. Such skins must be discarded, otherwise big problems will arise.

Before painting, defects on the skins are eliminated: bald spots, worn out and moth-eaten areas, bites and tears. These places are cut out in the shape of a fish, inserts are sewn in, or simply cut out and stitched. Weak skins, especially at the seams, are strengthened by gluing strips of spunbond non-woven material or non-woven material with MOMENT 1 glue. MOMENT 1 glue is ideal for skins.

The process of dyeing natural fur with hair dye

Before dyeing, a fur skin or a fur cap for a hat, which you have cut out and sewn from whole skins or worn fur (an old hat or collar), must be degreased by washing, since oily and dirty hair does not dye well. Unpainted areas and stains appear.

Prepare water at room temperature in a cup, add washing powder in a small amount and wash gently. The skins should already be tested for water, as sometimes the skins swell and tear from water. To prevent the skins from tearing, wash them without sudden movements and try not to twist them when squeezing. After washing, the skin is rinsed in clean warm water, lightly wrung out and prepared for painting.
Paint preparation process

The paint is prepared according to the instructions included in the box. Squeeze the hair dye and oxidizing agent (peroxide) out of the tube into a separate bowl and mix everything well. Spread the paint onto the skin or sewn fur cap using a sponge and rub it into the fur. The skin is rolled up and placed in a cup. After 10 – 15 minutes they come up and rub the paint well into the fur again. They constantly watch how the skin is dyed. After half an hour, darkening of the fur appears (if the mink is dyed brown), the longer the dyeing, the darker the color. Worn fur dyes faster.

At the end of painting, the skin is rinsed in clean warm water, and then washed with powder in warm water, rinsed several times until clean water. The skin is wrapped in a towel and gently squeezed without twisting, so as not to tear. Then the skin needs to be dried.

How to dry fur properly

To dry dyed fur, you need to use a hair dryer; it is best and more effective to use an old-style vacuum cleaner with reverse draft. Under the influence of an air stream, the fur quickly dries and fluffs up. If these are new skins and have not been cut along the belly, they can be pulled over the rules with the fur facing out and dried. The cut ones are stretched with nails on the shield with the fur facing out, after drying they are removed and crumpled. Such dyed skins can later be used to sew new hats or repair fur coats. Finished sewn and dyed fur caps for hats made by molding are dried with an air stream and, half-baked, pulled onto the block.

When repairing mink coats, it is sometimes necessary to tint the brown fur directly on the coats. The paint is rubbed with a swab into the faded area, after painting it is quickly washed off with water and dried with an air stream.

A little about secrets...

When making fur hats using the mold method, when sewing fur caps, sometimes it is necessary to insert light fur. After dyeing, pulling a fur cap over the block and drying, it turns out that light fur has a different color. In this case, you can tint the skin directly on the deck by removing the nails. High concentration paint is applied a second time to the unpainted area. After dyeing, the paint is washed off and the fur is quickly dried with an air stream.

As a result of prolonged wear and strong exposure to sunlight, mink fur becomes hard to the touch; such fur must be checked before cutting. A piece of such fur is dyed separately, after drying the fur is dyed disgustingly, the ends of the hair turn grey, the color is very bad. Sometimes, in a hurry, such fur appears on the finished cap, then you need to cut out this piece and replace it with a good one.

Often relying on the quality of the skin, it turns out that after dyeing the skin begins to tear. You can get out of this situation, pull the dried cap onto the finished block and glue the entire cap with pieces of spunbond using MOMENT 1 glue. When pulled onto the finished block, the skin will no longer tear.

When sewing a fur cap for a hat made by molding, you need to remember that the skins decrease in size after dyeing and drying, so the cap is cut out larger in the beat.

Other dyeing methods

Fur can be dyed in many ways. For these purposes, there are oxidative, direct, active, acidic and a whole range of dyes, including natural preparations. When painting, the dipping method is mainly used and, less often, the spreading method. All these methods are labor-intensive and require, in addition to the use of basic dyes, a whole range of additional preparations.

When dyeing fur at home, it takes all daylight hours. A finished fur product (hat, fur coat, vest) cannot be dyed using the dipping method; it is necessary to separate the fur skin from the lining material, and during painting the skins may shrink, and the skins decrease in size when drying. You can tint some defective areas (worn or faded), for example, on a fur coat or hat, by rubbing the paint into the fur using a spread method, and then quickly rinse with water and dry. With this method, household cream hair dyes have proven themselves to be excellent. Sometimes such problem areas are tinted with aerosols by spraying paint.

Spray for coloring fur

Often finished fur products (hats, fur coats) look excellent when worn for a long time, but faded spots appear in some places. In this case, there is no need to paint the entire thing; it is enough to touch up the problem areas with a spray.

To dye fur, you can use aerosol paint for caring for suede. It consists of metal cans of spray paint.
Aerosol for suede care

You need to choose the right shade correctly, otherwise the dyed fur will differ sharply from the main one. The area that needs to be tinted is cleaned of dirt and can be degreased with alcohol and wiped with a swab. It is advisable to cover the fur with any material, except for tinted spots. We spray the paint at a distance of 30 -40 cm so that the fur does not stick together and a uniform color is obtained. In this way you can get an excellent result, the painted areas will not differ much from natural fur, the paint will last for several months.

Caring for dyed fur

As a result of painting fur skins, individual pieces, fur caps for hats with persistent household cream hair dyes, carried out using the spread method, by rubbing the paint into the fur, we obtain a stable color. The paint is resistant to light, water and mechanical stress when wearing fur for a long time. Such items do not require special care; the requirements are the same as for any fur product.

The requirements for fur dyed by spraying are completely different. The color is not particularly durable, so it is better to protect such a product from the influence of light, water, mechanical stress and elevated temperature.

In order for the dye to stick better and the fur to shine, it can be treated with a special balm for the care of dyed hair. After this treatment, the fur becomes softer and fluffier.

Fur products require daily care, combing more often, and require thorough cleaning. Much depends on proper storage. Fur should be covered and stored in a dark place.