Why does the laptop say restricted access? How to get rid of restricted Wi-Fi access

In this article, we will look at the reasons why your router provides limited access to the WiFi network and how to fix it. The fact is that wireless technologies are becoming deeper into life. modern people. They allow you to exchange information without using wires. At the same time, communication is characterized by high data transfer speed.

But unfortunately, very often the most different problems with connection. Very often they are associated precisely with limited access to the WiFi network (that is, with a local connection, the computer does not connect to the Internet). Not everyone is able to answer such questions. Moreover, there can be a huge number of reasons for this. Therefore, let's look at the most common and common ones.

What can cause connection problems?

First of all, it is worth noting that when talking about WiFi technology, many people understand Internet access. This is not entirely correct, since communication itself does not provide access to global networks. To do this, your router must be connected to your provider. A WiFi router is just an access point that distributes WiFi. And if it is not connected to the Internet, then users will not have it.

This means that if WiFi does not connect on a laptop or there is limited access, then first of all the reason must be looked for in the router settings. In addition, there may be the following reasons:

• The user simply forgot to top up his subscriber account on time, and the provider restricted access.
• The WiFi router crashes (freezes as a result of a power outage, overload, etc.).
• Crashes in software or wireless adapter settings.

Let's look at all these reasons in more detail.

Checking router settings

So, first you need to connect to the router. This can be done wirelessly and using a cable. In any case, after connecting, open your browser and enter the router’s IP address in the address bar. As a rule, it is indicated on the device itself, just carefully inspect it from all sides. If you couldn’t find the information you needed, it is also indicated in the instructions.

If for some reason you cannot find the instructions, and the WiFi router does not have the necessary information, you will have to open the command line. If you are using Windows 8, then to start you need to press the Windows + X key combination and select “Command Prompt (Administrator)” in the menu that appears. If you are using the seven, then simultaneously press the Windows + R keys, in the window that appears, write CMD and click “Ok”.

On the command line you need to enter the following - ipconfig. This command is to view data about your network. All you have to do is find the line “Main gateway”. This is the address we need, which must be entered in the browser.

So, after that, press “Enter” and go to the authentication page. Here you need to enter your username and password. Initially, this is admin, admin, respectively. Click “Ok” and go to the settings menu. We'll consider further actions using the example of the D-LinkDir-615 model. If you have a different model, then do not be upset, since they all work on the same principle. The only difference is in the design of the interface and in the names of some sections.

WiFi router IP address: Video

First of all, you should click the “Advanced Settings” button, which is located in the lower right corner of the menu. Now we find the “Network” section. In it, click on the “WAN” subsection. These are the settings for connecting to the global network. As a rule, providers provide network information automatically, so in the “Connection type” line you need to select “Dynamic IP address”.

In some cases, it is recommended to enter information manually. To do this, you will need your agreement with the provider. In it you will find all the necessary information. To start manual configuration, in the “Connection type” line, set “Static IP address”. If you do not have a contract or cannot find one, you should call your provider's support line. The operator will provide all the necessary data.

Also, limited access to WiFi may result from purchasing a new router or changing the MAC address. The fact is that this address is registered on the server and is used for authentication. In other words, if it changes, then the router simply cannot authenticate, resulting in you having limited access to the wireless WiFi network. To fix this problem, you just need to call your Internet provider's support service and clarify the issue. As a rule, the MAC address replacement procedure takes about 5-10 minutes. In this case, you will have to reboot the router.

If everything is in order with the WiFi router settings, for example, if everything worked, but at some point access became limited (the computer does not connect to the Internet), then this indicates that a failure occurred. Or you should check your personal account. Perhaps you simply forgot to pay for the services.

If everything has been paid for, but access is still limited, then reboot the router. To do this, enter the settings menu. In the upper right corner, find the inscription “System”. Hover your mouse cursor over it and select “Reboot” from the drop-down menu. You can also simply turn off the router from the power supply for 7-10 minutes, then turn on the device again.

Checking the wireless connection to the operating system

Very often, the restricted access error occurs due to an incorrectly configured wireless connection in the Windows operating system. You can check this as follows. Open Network and Sharing Center. To do this, right-click on the network icon in the tray (the area in the lower right corner of the screen). Select the appropriate item. In the window that appears, open “Change adapter settings.”

Find the wireless network shortcut (in the seven it is called “wireless network connection”). Right-click on it and select “Properties”. Next you need to find Internet Protocol version 4 (TCPIPv4). Select it and click “Properties”. In the window that appears, you need to set a marker at the points for automatically obtaining an IP and DNS address.

The fact is that the router uses DHCP technology. This is a service that automatically provides all the necessary data, and if you install inappropriate data on your computer, your WiFi network will be limited when connecting to the router.

Click “Ok” and close all windows. If this does not help, then you should diagnose the problem. You can launch it by right-clicking on the network icon in the tray and selecting the appropriate item. Windows will automatically begin diagnostics. All you have to do is follow the prompts on the screen.

How to fix limited access to a Wi-Fi network: Video

Users often encounter problems accessing the World Wide Web. The reasons may be completely different.

Today we will try to figure out what to do if the system displays the message “limited access to Wi-Fi” and how to avoid this problem!

First, it’s worth understanding that the router itself does not provide access to the World Wide Web. To do this, it must have a connection to the provider and be configured. The router itself is a device for creating an access point over a WiFi network. Therefore, without Internet access, you will not be able to use the provider’s service.

What causes the limited connection problem?

How to fix the situation if you find limited access to your WiFi network? To approach the solution directly, it is necessary to study the main causes of the problem. If you have access to the Internet via a network cable, but the router does not allow you to access the Internet, then the following may interfere with this:

• incorrect network router configuration;
• failure of the router drivers (the situation is typical for unlicensed copies of the OS);
• The wireless network on the device itself is not configured correctly.

In addition, on laptops, the wireless network when connected to WiFi says “Limited” if the user has changed the power mode. So, in power saving mode, insufficient power may be supplied to the adapter, which causes glitches.

Solving the problem of limited connection on Windows 7

Limited access to WiFi on a laptop with Windows 7 is most often observed due to incorrect IP address settings. You can fix the problem as follows:

Note! If the router has a different address, for example, 192.168.0.1, then you need to set a different address on the laptop from the same subnet. The countdown of available ones starts from 192.168.0.2.

Solving the problem of limited Internet access on Windows 8

Quite often, users note that when updating the Windows 7 OS to version 8, there are failures when accessing the Internet. What does limited Internet access via WiFi mean in this case and how to fix it? This is usually due to incorrect transfer of drivers from the “seven” to the new operating system. In this case, there will be access from other devices, but from a laptop running G8, it is limited.
What should I do if my Windows 8 laptop has limited WiFi connectivity? The solution is to enable/disable the network adapter:

Why does it say limited Internet access via WiFi? The culprit may be the low connection priority in the OS. It is worth saying that software control of this parameter will not be enough. Sometimes, to solve a limited network problem, you have to disable higher priority devices, such as an Ethernet connection.

This is done as follows:

What should I do if my phone has limited connection?

Problems with network access are also observed on mobile devices. What should I do if my phone has limited WiFi connection? The solution to the issue comes down to the following steps:

Today the hero of my post will be another network problem that poisons the lives of broadband Internet users who have a modem or router at home. Namely - limited WiFi access. This can be encountered on both Windows 7 and Windows 8, and will most likely happen on the next ten. Moreover, this can manifest itself on a desktop computer, on a laptop, and even on a tablet running G8.

Let's look at the most common reasons why the system writes that the WiFi network is limited, diagnostic options and ways to correct the situation.

Step 1. First you need to determine which direction to “dig”. To do this, let’s check whether there is any access to the global web from our router. If you have a tablet, smartphone or other laptop with a Wi-Fi module, then connect from it and check your Internet access. Also no access? Then reboot the router by turning the power off and on. Has access been restored? Great.
If not, go into the settings of your wireless router and check them. Is everything configured correctly? Then it looks like the problem is on the provider's side. We call technical support and find out the reasons.

Step 2. If Internet access is available from other Wi-Fi connected to the home network, namely on one computer or is limited, then the source of the problem lies precisely in its software or hardware settings.
Let's try to simply turn off and turn on the adapter. To press the key combination Win+R and enter the command: ncpa.cpl

Network connections will open (this is true for both Windows 7 and Windows 8).
Among the available connections, we find the wireless adapter and right-click on it: First, select the “Disconnect” menu item and wait until it disconnects.

Then right-click on it again and select “Enable”.
We check access.

Step 3. Very often, in an attempt to protect your computer from external threats, installed antiviruses and firewalls block everything that seems suspicious for some reason. This can also happen with a wireless network. And you will dig through all the settings of the router and computer, but a message will still be displayed that WiFi is limited. Therefore, before delving into the jungle of operating system configuration, first try disabling the installed antivirus and firewall:

Paradoxically, this is one of the most common reasons.

Step 4. The reason for limited access may be incorrect IP settings on your computer or laptop. Let's rule out this option as well. Right-click on the wireless connection and select the menu item "Properties". In the window that opens, we are interested in the “Internet Protocol Version 4 (TCP/IPv4)” component. Double-click on it and another window will open. Here we check the box “Use the following IP address”:

We indicate the address from the router subnet. You can recognize it by turning the device upside down - its IP will be indicated on the sticker. Most devices have a default address of 192.168.1.1, so we set the IP as in the screenshot above.

Note: If your router has a different address, such as on D-Link - 192.168.0.1, then accordingly on the computer the IP must be specified to any of this subnet, starting from 192.168.0.2.

Does not help? Try returning the checkbox to “Obtain an IP address automatically”, but enter the DNS server addresses manually. It also happens that the provider’s default DNS systems fail. To exclude such a case, we indicate the addresses of the public Google and Yandex servers - 8.8.8.8 and 77.88.8.8:

Step 5. On laptops, the reason that Windows writes “Limited” when connecting to WiFi may be power saving. The system simply reduces the power supply to the adapter and it starts to act weird. To avoid this, in network connections, again right-click on our long-suffering adapter and again select “Properties”:

Only now click on the “Configure” button. In the window that opens, select the “Power Management” tab and uncheck the “Allow the computer to turn off this device to save energy” checkbox. Click OK, reboot and check.

Step 6. If you are using a USB Wi-Fi adapter, try disconnecting it, rebooting and connecting it to a nearby USB connector.

This move sometimes helps in cases where flash drives and various devices are often attached to the computer, and as a result, the USB bus begins to slow down.

Correcting Wi-Fi connection settings

To understand why Windows 8 does not see wifi and make sure the settings are correct, let’s open the “Network and Sharing Center” by right-clicking on the network icon in the tray.

In the “Changing adapter settings” section we will find our network connection. From its context menu, select the “Status” command. By clicking on the “Details” button, you can view the properties of the current connection. Most often, if Wifi is limited in Windows 8, the problem can be found there.

What you need to pay attention to when setting up wifi windows 8:

• Description: Your wireless adapter.
• IPv4 address: The IP address assigned to your computer on the Wi-Fi network.
• Default Gateway: IP address of the access point - it can be a home router or any other source of Wi-Fi signal.
• DHCP server Ipv4: The DHCP server is usually the Windows 8 Wifi access point and its address will be the same as the default gateway address.
• IPv4 DNS servers: the role of the DNS server is also usually played by the access point, but sometimes in this line you can see other IP addresses that may belong to either the network provider or someone unknown (for example, malware).

You can edit the Wifi Windows 8 setting here: by selecting “Status” from the context menu, click “Properties”. In the list of components used by the connection, select Internet Protocol Version 4 and click Properties again.

On the General tab you can configure the connection configuration. You can configure connections in IPv6 networks in the same way.

In large Wi-Fi networks, you should not enter IP addresses manually, since a conflict is possible (several devices trying to access the network with the same address).

If, after checking the settings, you see that the Wifi connection is still limited, your Windows 8 may not have been updated since installation. In its early versions, a number of network stack errors were noted, which were later fixed by the developers. Therefore, to solve the problem, you need to install all system updates before connecting to the wireless Internet.

Setting up wifi Windows 8.1 is similar, there are no global differences.

Attention! Many solutions to the WiFi limitation problem have been proposed by our dear readers, so we recommend reading the comments!

Greetings dear readers of my blog. I think it’s no secret to anyone that today wireless technologies have become an integral part of the lives of our compatriots, and thanks to the highest data transfer speeds, exchanging information has become easier and more convenient than ever before. However, unfortunately, not everything always goes smoothly, and many people have all sorts of problems related to accessing the World Wide Web. One of the most frequently asked questions goes something like this: what should I do if my writing is limited when connected to wifi? There are several most common reasons for this problem, so we will analyze them all so that you are always aware of how to solve it yourself and quickly.

Where to begin

So, if you turned on your computer or laptop as usual, but when you try to access the Internet, the system gives you a disappointing message that the connection is limited, then it’s definitely worth taking some action. First, remember whether you have paid for access to the network and whether you have any debts to the provider. It would also be a good idea to make a call to hotline the company that provides you with Internet access services and inquire about the possible reasons for the lack of Internet access. If after this step the problem has not cleared up, then proceed to the following steps:

1. Check that all communications are connected correctly on the wifi router itself. It also happens that due to changes in electrical voltage, the operation of the router is disrupted, and it simply needs to be rebooted so that it can distribute the Internet again.
2. Disable the antivirus on your computer for a while. Some applications of this nature may be too overzealous in protecting the user, leaving him without access to the network.
3. Try connecting to the wifi router from other devices that are at hand. If your phone or tablet has Internet access, then the hardware settings of your computer are clearly the cause of the problem. To solve it, you need to call the command line (Win key + R) and enter ncpa.cpl into it. In the network connections panel that opens, you need to find the wireless adapter and right-click on it. First, you need to select the “Disable” item, wait until the adapter is completely disabled, and then press the “Enable” button.

If you have done all the manipulations listed above, but when connecting to wifi you still write limitedly, then do not despair, there are at least a few more reasons, after finding out which you will definitely be able to solve the problem.

You need to find the wireless connection icon on your computer screen, right-click on it and select the section called “Properties”. A software window will open in which you need to find and double-click on the “Internet Protocol Version 4” component. In the next window that opens, information with the current IP address will appear, which must be checked with the specified subnet address (located on a sticker located on the bottom of the router itself). If this does not help, then try changing the checkbox to automatically obtain an IP address.

Power Saving Mode

The reason for limiting Internet access on laptops running Windows OS may be the power saving mode. On many portable devices, the system can take various measures to save money, including limiting access to the network. To solve the problem, go to “Network connections” again, find the adapter and open its properties. Now you need to click on the “Configure” button, which is located in the right top corner screen. In the window that opens, in the “Power Management” section, you need to uncheck the box next to “Allow the computer to turn off this device to save energy,” then click “Ok” and restart the laptop.

Driver problems

If all of the above actions did not bring a positive result, then we can say with a high degree of probability that the reason lies precisely in the driver. So, first you need to call the command line (“Win” + “R”) and enter the following combination: devmgmt.msc, then click “Ok”. In the window that appears, you need to remove everything related to network adapters, then restart the computer and install all the drivers again. If you do not have a disk with the required drivers, which usually come with the device, then it is recommended to take them only from official sources. Now try connecting to the network again.

Bottom line

Now you know why your Wi-Fi connection may be limited, so you can solve the problem literally in no time by using this simple algorithm of actions. That's all. Good luck!

Connecting to the Internet using a Wi-Fi wireless network is not difficult: when there is necessary equipment, you just need to do a few simple steps and you can enjoy the open spaces virtual world... But not everything is so simple, for example: the system refuses to see the adapter or the status “connection is limited or absent” appears. These and other problems will be discussed in this article.

Ideally, connecting to Wi-Fi on Windows 8 works as follows. Provided that your PC has a wireless module, all drivers are installed and Wi-Fi is turned on, then on the taskbar you can find an icon displaying network divisions with an asterisk on top. This means that you and your PC are on the right path, and the last one of you sees networks with which you can establish a connection. By clicking on this icon, you should select the desired network Wi-Fi, then click “Connect”, then (in the window that opens) enter the network password and click the “Next” button located just below.

After this, a window will appear in which the computer will ask you about the possibility of sharing the network. This is very important point responsible for the security of your PC. If you are at home (i.e., home network), then you can allow shared access, but if you are in public place, then you cannot enable sharing. If the connection is successful, the icon with a snowflake will be replaced with an icon with the signal level (i.e., the same sign will become filled and that same snowflake will disappear). Now let's look at possible problems connecting to Wi-Fi Fi.

The leading problem is the lack of accessible networks within the laptop's field of view, and sometimes the complete absence of any wireless networks. In this situation, on the taskbar you will see a monitor icon with a red cross in the corner, indicating that there is no connection.

There are several reasons:

Lack of a Wi-Fi network adapter (it is usually built into laptops; you most likely will not find it on desktop PCs);

Lack of drivers for the Wi-Fi adapter (which is not typical for Windows 8 or 10, but possible); - wireless connection is disabled;

Wi-Fi adapter is broken;

The solution to these problems is quite easy. In the first case, you need to buy an adapter. As for the lack of drivers, you first need to make sure that you have diagnosed the problem correctly. To do this, right-click on the Internet connection icon, open “Network and Sharing Center,” and then open “Change adapter settings.” If, after looking at the adapters, you do not find a connection called “Wireless Network,” then you can be sure that there are no drivers (if, of course, there is even an adapter that requires these drivers). In this situation, the problem is solved by downloading and installing the driver.

Sometimes it happens that the adapter, the driver, and the “Wireless Network” connection are there, but the connection itself does not work because it is disabled. In this case, you need to find it (how to do this is indicated above) and turn it on with the right mouse button. Another problem could be an incorrect password. It is issued as an error “Invalid network security key. Try again." If you have forgotten your password, you can find it in the router settings or on another PC.

Now let’s talk about the second leader when it comes to problems connecting to a Wi-Fi network on Windows 8 or 10. This is the “Restricted” icon, which appears as a yellow triangle with an exclamation mark located on the taskbar. It appears after connecting and does not allow the Internet to work. First, you need to check how the Internet works from the same source on other devices. If everything is in order there, then the problem is really in the computer, namely in its operating system.

There are several options for solving this problem, and which one is correct is determined through experiment: - changing the adapter driver; - changing the operating mode of the router itself; - setting the time, date and region on the router; - setting compatibility with FIPS; - disabling the antivirus; - resetting the data usage assessment.

It's no secret that most network users prefer to connect to the Internet through a Wi-Fi distributor. It's good when there are no problems with this. But what to do if the system shows an error? As you know, there can be at least two options in this situation: contact a service center or try to fix the error yourself. We will consider the case when a computer with Windows 8 says “restricted” when connected.

Let's clarify the cause of the problem

It happens that users complain that initially there were no problems with connecting via Wi-Fi. However, after a while the Internet disappears, and the Restricted status appears next to the wireless network icon. Why is this happening?

There can be quite a few reasons, from problems associated with the router to problems in the system itself. First, make sure your Wi-Fi connection is turned on. See how it interacts with other devices. If, for example, a smartphone connects to the network without problems, but an error occurs on a laptop, then most likely this is due to.

Correcting connection settings

Alternatively, problems may arise due to a settings glitch. In this case, open the Network and Control Center. Here you need to select Change adapter settings. It is located on the left side of the screen.

Here we find the network connection that interests us. In its menu, click Status and go to Details. Often incorrect settings can be found here. You can edit parameters in the same section, for which you need to go to Properties. You will learn more about setting up an Internet connection from this page.

Other error correction options

So, if the above did not help you fix the error, then there are a few more working tips that you can use. The problem may be with your antivirus. Dr.Web is especially prone to this problem. A program can block access to the network for some reason understandable only to it. Try disabling all protection modules and connecting to the network again. Of course, surfing the Internet without an antivirus is highly discouraged, so consider installing another antivirus program. all types of antiviruses here.

You can try to fix the “connection restricted” error by activating FIPS compatibility mode.

Oddly enough, you can get rid of connection restrictions by resetting the time, region and date in the Wi-Fi router settings.

To do this, you need to go to the Wireless tab, directly where the wireless connection itself is configured. Select the desired region, save the changes and reboot the device. Time and date are corrected in System Tools. This section usually contains other system settings.

So, there are several reasons why the “restricted” connection error appears. In Windows 8, it is fixed by various means, depending on why it occurred. Don’t forget to install updated drivers on your router, which is one of the common causes of the error. If all of the above actions do not bring any results, you will have to turn to specialists. However, before doing this, remember that after making changes to the router or system settings, reboot the device, otherwise they will not be activated.

Users of computers and laptops running OS MS Windows 7 often encounter problems connecting to the Internet wirelessly. One of them is “Without Internet access” (connection is limited) via Wi-Fi technology. Everything seems to be configured and connected correctly, but you cannot access the network. On the connection icon located in the notification area, you see a yellow triangle with an exclamation mark.

This means that the network is active, but there is no Internet. Hover your cursor and you will see this message: “No Internet access.” “In other versions of the Windows operating system, the text will be slightly different: “Connection is restricted.” But changing the words does not change the meaning of this problem - there is no access to the network on your device.

This error appears regardless of how the computer is connected to the Internet - via an Ethernet cable (directly or through a router) or using wireless access. But again, we have a separate article on Ethernet connections. And here we will consider only a wireless connection via a Wi-Fi network. Separate instructions for each connection are more convenient and understandable.

So, you have connected the Internet on your personal computer, desktop or laptop, via a wireless router. There is a connection, but the Internet itself is missing. Now we will try to fix the connection error by first finding the cause.

“No Internet access” over a wireless network in Windows 7: possible solutions

There are many solutions offered by both ordinary users and specialists. We have repeatedly encountered the problem of limited connection (no access to the network), and we can safely say that there are only three reasons: incorrectly configured router parameters or its malfunction, a failure on the side of the Internet provider and problems with the computer itself.

And if we find one of these three reasons, consider that the solution has been found.

So what you should do first thing:

1. You connect to the Internet by first setting up your router. And if, after connecting the device to the computer, you see the “not available” status and an exclamation mark on the antenna icon, then it’s all about incorrect router settings. The connection status indicates that the Internet is not available on this device. And we just found out the reason - the router is to blame. But what? First, you may have forgotten to configure your router to work with your service provider, or you may have set the wrong settings. Secondly, the router itself may not be configured correctly. Don't forget that each model has its own setup instructions. Thirdly, the router may simply be faulty. And to determine this, connect from a smartphone, for example. If the Internet does not work, the router is to blame.
2. Everything was fine with access to the Wi-Fi network, but after turning it on, restarting the computer, or while surfing, the connection disappeared. The very first thing to do is reboot both the router and computer. After reboot, connect wireless Internet. In most cases, the problem of unexpected connection loss is resolved.
3. A common reason for lack of access to the Internet after connecting a computer to a wireless Wi-Fi network is the banal cable. Yes, the one that goes from your network provider to your router. For example, there are cases when users do not fully connect it to the WAN connector or even confuse the connectors. And this happens when, instead of the WAN, due to an accidental error or ignorance, the cable is connected to the LAN connectors.
4. And it also happens that the reason for limited access to the network is even more trivial than in the case of connectors. You can spend several hours setting up your router, changing DNS addresses and puzzling over other reasons, and then remember that the personal account has run out of funds. Check your balance!
5. To effectively solve a problem, you need to determine the cause. As we wrote above, this could be a service provider (provider), the computer itself or the router (technical malfunction or incorrect settings when connecting). Finding the reason won't be difficult. First thing connect from another device(smartphone, tablet, ultrabook, PC) to this router. If the Internet works fine, look for the problem in the first device - a laptop or computer. But if not, we choose one of two options - the problem is with the provider (incorrectly configured, no connection) or with the router (technically faulty or parameters set incorrectly). To determine who exactly is at fault, connect the cable directly to the laptop, without a router. Well, here everything is simple: the Internet appeared - the router is to blame, it still doesn’t work - the problem is with the provider or, again, with the PC. To begin with, eliminate technical work on the provider’s side by calling the support service. Perhaps they are just carrying out preventive work. Another way to determine the cause of a limited Internet connection is to connect the router not via wireless technology, but using an Ethernet network cable.

So, we found the reason, now we’ll tell you how to fix everything.

Error “No Internet access” problem in the computer (laptop)

If you connected the router to a smartphone or other laptop, and the Internet on this device started working, then it is your computer that is to blame for the lack of access to the network. What can be done in this case? If possible, connect to another Internet, not Wi-Fi, and check if there is access. If the Internet suddenly disappears, remember what you did before. Maybe they enabled or disabled some Windows service, installed a new application or antivirus software, changed network settings, programs, etc., etc. Remember.

If you don’t remember any “sins”, let’s try the most popular solution first - change the DNS and IP parameters. For example, if you received addresses automatically, let's set them manually. And vice versa: if you registered them manually, we will change the option to receive them automatically. So, let's do the following.

• Click on the antenna icon with the sign yellow color to enter the Network Management Center.

• There on the left there is an option for “Change adapter settings”. Click on it.

• Find your wireless adapter and look at its “Properties”. Specifically, we need the “Internet Protocol Version 4 (TCP/IPv4)” parameters. See which items are ticked. If you get DNS and IP automatically, uncheck the box and specify static addresses. How to do this is shown in the picture below. But before you enter these parameters, make sure that the router’s IP matches (look at the address indicated on the router sticker). And specify the DNS addresses as follows: 8.8.4.4 , 8.8.8.8 .

• If you opened the properties of “Internet Protocol Version 4 (TCP/IPv4)” and saw the specified parameters there, uncheck the static settings and set the address to be obtained automatically. That is, we try everything in reverse, or both in turn.

Enabling Federal Compliance Mode (FIPS)) - as a possible solution

Let's try to use the FIPS mode, and maybe it will help. Click on the antenna icon in the notification area, where the yellow triangle with an exclamation mark still pleases the eye.

To do this, go to the “Changing adapter settings” section (discussed above), there find your “problematic” “Wireless network” and open its “Properties”. A new window with tabs will open. Select Security and click on the button with Advanced settings. This is where the compatibility mode with FIPS, the American information processing standard, is turned on.

Check the box, click OK and reboot to activate the new settings.

• What else can you come up with if none of the above, alas, works? Try to temporarily stop everything that interferes with the normal operation of the network or completely blocks it. It could be antivirus program, which first appeared on your computer, browser extensions installed after its installation, a firewall, etc.
• You can also download and install new driver for an adapter (downloaded from the official website of the manufacturer of your laptop or PC) or replace it with another one available in the system. Read about this in the article (it describes Windows 10, everything is the same on Windows 7).

Is the problem with the router or the Internet provider? How to fix this problem

Checking your provider is very simple - by connecting directly without a router (to a network cable). If you have Internet, call technical support. support. This could be anything - from equipment breakdown and preventative maintenance to simple non-payment of services. Therefore, before setting up a router, connecting a cable, etc., call your provider or go to their website.

If the router does not work on other devices either, check the correct cable connection and the settings themselves. See the picture and correct if yours is different:

If the cable was connected incorrectly, correct it and be sure to reboot the router.

If the internet still doesn't work, check if it's configured correctly. Your device may not be able to communicate with your service provider because you have configured the wrong parameters to connect to it. Open the router settings (this is the Internet or WAN tab, depending on the model) and set the correct connection used by the network service provider, as well as other settings. Each router model is configured differently. Look for the instructions for your device and configure it as needed. There is nothing complicated about the router settings even for an untrained user, if you follow the recommendations exactly.

These are the solutions to this common error in Windows 7. And if you correctly determine the cause of the problem (equipment failure, maintenance work at the provider, forgot to pay for services, or incorrect router settings, or computer malfunction), your wireless Internet will work.

If you have any other solutions, please share with us. And stay tuned for our updates, maybe it will appear new way, which will help solve the error with limited Wi-Fi connection of personal computers on the MS Windows 7 operating system.

Hello friends! In this article we will try to solve another very tricky problem that occurs on Windows 8 when connecting to a Wi-Fi router. This connection status is “Restricted”.

I'll probably start by saying that I started noticing the same problem in the comments. People wrote that Windows 8 laptops connect to Wi-Fi, work fine for a while, and then the Internet disappears and the status appears "Limited". And the network icon with a yellow exclamation mark. Like this:

So questions arose, I gave some recommendations, they did not help. I kept promising to sort out this problem.

My attempts to understand the problem

A question came up and Maxim left it. He wrote that he has Windows 8 and connects to a wireless network (TP-Link TL-WR841N router) For about 10 minutes everything works fine and the connection is lost. Status Limited (as in the screenshot above).

He asked to contact me on Skype. I don't usually do this (I have enough comments :)), but here it was already necessary to deal with this problem!

Maxim and I tried to solve this problem for three days via Skype. (mostly in the evenings). And we almost succeeded :). Everything seemed to be fine, the Internet was working stably, but a few minutes ago Maxim wrote and said that the network had disappeared again. But we have a few more options, let’s check them out :)

I was already thinking about not continuing this article, but I still decided to write and tell you what we tried to do (what we haven’t tried :)) and what helped, though not entirely.

What we tried:

At first I advised just installing Windows 7 :). But this option was not suitable, license and all that.

1. Change the password and security type in the router settings. Read about it.

2. Experiment with the wireless network channel. Reading.

3. Set the correct time zone and time in the router settings.

4. Updated the driver for the wireless adapter. I wrote about this in an article.

5. We tried setting static IP and DNS in the settings of the wireless adapter on the laptop.

7. We tried setting the “Only g” mode. Read more about changing modes.

And that’s probably not all :)

What seemed to help:

Maxim found a method in which it was written that you just need to remove the wireless adapter in the device manager and update the hardware configuration. He did not delete anything, but simply right-clicked on the wireless adapter and selected “Update hardware configuration.”

Oddly enough, this helped for a while, but still, after 20 hours of work, the Internet was cut off and the “Limited” status appeared. If this happens again, we will try to remove the adapter.

We confirm the deletion.

The system will then update the configuration and you may need to reinstall the driver for the wireless adapter. Above there is a link to an article on how to do this. Only when you download a new driver, make sure that it is for your laptop model and is compatible with Windows 8.

In this particular situation, there is also no need to rule out viruses, problems in some program, system failure, defective device, etc. But there is a problem, which means there must be a solution.

Windows 8: connection status “Restricted”

Of course, the reasons may be different, so perhaps one of the tips that you will find below will help you, and use it to solve the problem with unstable Internet operation in Windows 8 (8.1).

One important point. How do other devices work with your network? If the Internet also does not work on them, sites do not open, the status is No Internet access, then most likely the problem is in the router itself. See these articles:

If other devices work normally, then the problem is still in the laptop, or rather in Windows 8. Try to follow the recommendations that you will find below. And don’t forget to share the result in the comments.

Working tips that help you get rid of the “Restricted” status

Update #1. Install driver 5.100.245.200 for Broadcom

In the comments Vyacheslav (thanks to him!) shared one solution for Broadcom adapters that helped him get rid of this problem. I quote:

For those who have a “Broadcom 802.11n” adapter, the people have found a solution and struggled for a long time. Open the device manager “Broadcom 802.11n” adapter-properties-update drivers - search on this computer - select from those already installed - UNTICK only compatible devices - select 5.100.245.200 from the list and check it. Everything is working?

And don’t update the driver; it’s the only driver without a glitch for Windows 8 and 8.1 today, and Microsoft technical support is silent about this.

More detailed instructions with pictures:

Click to view instructions

Go to My computer, right-click on an empty area and select Properties. In the new window, on the left click on device Manager.

Select an item “Search for drivers on this computer”.

Uncheck the box Compatible devices only, select from the list Broadcom, then select the driver whose version 5.100.245.200 .

That's all, the driver is installed.

After these steps, the Internet in Windows 8 should work stably. Without “Limited” status.

I don’t have the opportunity to test this method right now, but I hope it will help you. Don't forget to write how it worked, whether it helped or not.

Thanks to Nikolay for the screenshots!

Update #2. Changing the operating mode of the Wi-Fi network.

In the comments there was information that this problem can be solved by changing the operating mode of the wireless network. The problem occurs when devices are connected via mode n.

If in the router settings you set the choice only between modes b/g, or only g, then the problem is solved. And the network on Windows 8 works fine. But I haven't checked it (information from comments).

Everything is written there in detail and shown in screenshots. There shouldn't be any difficulties with this.

But this method has one drawback. Decreased Internet speed over Wi-Fi. Since mode n operates at speeds of up to 300 Mb/s. And g mode – up to 54 Mbit/s.

Update #3. Set the correct region, time and date

In the comments, there was also information that this problem was solved by setting your region, the correct time and date in the router settings.

Here's the comment itself:

You can change the region in the router settings on the tab Wireless (where you set up Wi-Fi). Just select the region where you are, save the settings and reboot the router.

Change the time and date on the tab System Tools (system settings and the like).

Thanks Igor for the advice!

Update #4. Enable FIPS compatibility mode

Another working tip appeared in the comments. Igor wrote that the method of enabling FIPS compatibility mode helped him.

NikiNik checked it and was also convinced that the method works. The Internet on Windows 8 began to work stably. NikiNik sent me screenshots so that I could add this method to the article.

Instructions for enabling FIPS compliance:

Click to view instructions with screenshots

Let's go to .

Right click on the connection Wireless network and select State.

Click the button.

And put a tick next to it.

And press Ok.

Thanks to Igor and Nikolai (NikiNik) for the tips and screenshots!

Update #5. Disable your antivirus (special attention to Dr.Web)

In the comments, Vladimir shared information that completely disabling the Dr.Web antivirus protection helped him. It turns out that Dr.Web was blocking the connection and the Internet was not working.

You need to disable all protection modules. Also, if you determine that the problem is in the antivirus, you can try adding your connection to the exceptions.

If you don’t have Dr.Web, but another antivirus, check it anyway, maybe that’s the problem.

Afterword

I also wanted to ask you, maybe you know how to solve this problem and make sure that the Internet works stably. Share your advice or thoughts in the comments. Thank you from me :)

All the best!

Also on the site:

“Restricted” status in Windows 8 (8.1) when connected via Wi-Fi updated: April 9, 2014 by: admin