Draw a racing car with a pencil for a child. How to draw cars step by step with a pencil

So, now I’ll tell you and show you everything I know about how to draw a car with a pencil step by step!

Scheme 1

This scheme is suitable for the little ones. Let's start drawing with the wheels. Try to keep them more or less the same.

Now connect the wheels with a horizontal line. But what is a car without headlights? This is a mandatory element that should not be forgotten. I propose to depict the headlights in the form of two ovals, as shown in the figure below.

Add a semicircle above the wheels. Connect it to your car's headlights.

But how to drive this car? A steering wheel is a must! Two parallel lines, oval - and it's ready. In general, the whole car is now ready! Paint it well and you're ready to go! =)

There are other diagrams that explain how to draw a car step by step. They may be a little more difficult, but I am sure that you will certainly cope with them. Try!

Scheme 2

When drawing a car on paper, identify those details that you simply cannot do without. This is the body, cabin, wheels, bumper, headlights, steering wheel, doors.

Scheme 3

Oh, don't you want to try to draw? racing car? I have an easy and clear diagram, but the car turns out simply amazing.

Scheme 4

Here are a few more diagrams that will tell you how to draw a car beautifully.

Scheme 5

Drawing a convertible with a simple pencil.

How to draw a truck step by step.

Of course, they know how to draw a car experienced artists. For beginners, understanding how to draw a car correctly is by no means easy, because a car is a very complex vehicle. Therefore, to learn how to draw cars, you can not only make sketches from life, but also copy from high quality photos. If it is difficult to draw straight lines, then you can use a ruler as an auxiliary tool. In general, before drawing a car you should prepare:
1). Liner;
2). Pencil;
3). Pencils of various tones;
4). Eraser;
5). Landscape leaf.


It will be easier to understand how to draw a car with a pencil if the process of working on this kind of image is divided into separate stages:
1. Draw the body of the car without going into detail;
2. Draw wheels on the car. Draw the wheels located on the left more accurately, and the wheels located on the right should be barely visible;
3. Draw the doors. Draw various small parts such as bumper, rear view mirror and headlights;
4. Now you know how to draw a car with a pencil step by step. To make the image clearer, outline it with a liner;
5. Using an eraser, erase the pencil sketch of the car;
6. Use gray and dark brown pencils to color the wheels and small parts;
7. Pink color color the emblem. Use a blue-green pencil to paint over the body of the car;
8. Paint the car door handles with a swamp green tone. Paint the stripes on the car doors dark green and lightly shade the small details;
9. Use yellow and orange pencils to color the car headlights. Lightly shade the car windows with a blue tint.
Drawing passenger car now ready. Having learned how to draw a car step by step, you can quickly learn how to draw a car of almost any model, be it a foreign Mercedes or a domestic Lada. It is not at all necessary to color the drawing of the car with colored pencils; you can limit yourself to shading done with the most ordinary sharpened pencil. You can also paint the car with paints, for example, bright gouache or watercolor are ideal for this purpose. Little children will surely enjoy decorating the drawn car with felt-tip pens, which have very rich and varied shades.

Another lesson on modern technologies. But this time it’s not a robot or a phone, but a car. You will find out easily and quickly. Personally, the whole process took me literally 10 minutes. Of course, this is not perfect drawing, but you can work a lot more, adding a lot of details, thereby making the car very realistic. (Or vice versa) Before I get down to business, I must warn you. This is not the only car on our site. You can also draw:

  1. (which girls like);

And at the end of this article there will be links to 6 more cool cars that you can easily copy. So read to the end. Now let's start studying step by step lesson. STEP 1. The first step is quite easy. All you need to do is make an elongated shape for the future. It should look like an oblong box. It even somewhat resembles a guitar or violin. Try to repeat exactly as shown in Figure 1.

STEP 2. Using this form, we will gradually add details and draw out the real body of the car. It's best to start with the roof and then move on to the wheels and rear end. Do not use rulers or auxiliary tools as the vehicle rounded shapes. And here everything is much simpler than, for example, drawing a helicopter. But if you want, you can use a ruler to draw the car windows, and later round them off manually. STEP 3. Start drawing the glass. The windshield comes first, the passenger side window later. There might be some Barbie girl sitting there or famous singer Debby Ryan. Next we draw the headlights. STEP 4. On pencil drawing of a car we only see the car from one side, so we draw only one door and the running boards under the door. Add window frames. Don't forget to make a handle and a keyhole. STEP 5. Move on to the hood. Draw two lines on the hood and a grille below. Next, outline the lining for the spoiler and the bumper. STEP 6. We are all ready to go. All that remains is to draw the wheels of the car. Please note that the wheels are not round! Under the weight of the machine, they become a little flat at the bottom. It will look more realistic. Well, of course, the tires are not perfectly round. STEP 7. And finally, we carefully draw the rims. Try to repeat it as in the picture, or you can draw your own version, so they can be different types and shapes, for every taste and color. STEP 8. Remove unnecessary auxiliary lines using an eraser and trace the contours. This is how it should turn out: Now, I hope you will already know about this. And here’s how Roma Burlai drew it:
Would you like to see more pencil drawings of cars? Write about it in the comments!

The modern automobile industry surprises and delights car fans with a colossal variety of models that were difficult to even imagine just a few years ago, and therefore the possibilities for artistic image much more appeared. But in order to realize this creative impulse and draw a car, you need to know some subtleties.

What you need

In addition to patience and perseverance, to create a drawing of a car you will need:

Useful tricks

What to do if you really want to make a drawing, but you don’t have enough skills?

You can use some tips that will allow you to find a compromise between desires and capabilities.


Draw Lada Priora

The popularity of the Lada Priora car can be explained very simply: good price, relatively good quality, but in case of an unforeseen situation on the road it’s not too bad. So for young people who have just received their license, such a car is an excellent option. So teenagers are happily engaged in the graphic materialization of their dreams, namely, drawing the Priora BPAN.

This is interesting. The abbreviation BPAN stands for No Landing Auto No and denotes a community of motorists who prefer cars with modified suspension in the direction of lower ground clearance.

Instructions:

  1. We start with sketches of the machine, that is, we draw two parallel lines - at the top and bottom.

    We start the drawing by drawing auxiliary lines

  2. Between these segments we draw two curved lines on both sides.
  3. We take on the left wing, making its outline slightly curved to the left.
  4. Underneath is an arch for the front wheel. To make the arch line more voluminous, we make it double.

    For the volume of the arch, we make its line double

  5. Draw the middle and side parts of the machine.

    Make the door line curved

  6. The next task is to show the rear door and fender. Make a line parallel to the bottom of the body.
  7. Showing the arch under the wheel.
  8. We outline the line of the rear bumper.

    Draw the lines of the bumper, arches under the rear wheel and the lower part of the body

  9. Let's move on to the roof. We make two perpendiculars to the front and middle windows. We draw a smooth line for the sloping rear window.

    The lines of the windshield and roof should be smooth

  10. We draw the rear part of the body: the trunk with a small circle and an oval - LED headlights.
  11. Add a license plate at the bottom.
  12. We are working on the image of the rear bumper. We show the reflective element with a small rectangle.

    We complete the drawing by drawing the details of the rear bumper

  13. Under the arches we draw semicircles with double lines - wheels. Use a soft pencil to determine the thickness of the wheel.
  14. We draw a few strokes in the center and on the tires, and between these lines we show the stamped Lada wheels in small circles.
  15. We erase the auxiliary lines, draw an outline and, if desired, color the car with pencils, felt-tip pens or paints.

    You can color the drawing with simple pencils

Video: how to draw a Priora BPAN, starting with the windshield

Video: how to draw a Priora professionally

Drawing a racing car step by step

You can hardly find a car lover who would be indifferent to racing cars. Speed, mobility and beauty are what make race cars so popular. However, drawing this masterpiece of the auto industry is not so easy.

Instructions:

  1. The basic rule for depicting a racing car is to first convey on paper the most simplified sketch possible. In this case, we start by drawing an elongated body.

    We start the drawing with auxiliary lines

  2. To add volume, we add the upper part - the driver's and passenger seats. Along the outer edge, based on a line drawn parallel to the outer edge, we build the interior frame.

    To add volume, draw the roof lines and interior frame

  3. Let's start with the bottom part. We draw the bottom line, making recesses for the wheels.

    Draw the recesses for the wheels, round off the line of the rear bumper

  4. Due to the fact that the car is located at an angle, we make the wheels oval.

    Due to the fact that the machine is located at an angle, the wheels should not be round

  5. We make the lower part of the car curved.

    To give correct form round the front of the body

  6. Let's move on to the top. Add a side mirror and soften the initial lines with soft strokes.

    Soften the top lines, finish drawing the side mirror

  7. Add two lines of the car to the side and back.

    Add lines to the side and back

  8. We erase the extra lines and work out the details. We start with the front lines and add headlights.

    Remove extra lines and draw headlights

  9. Draw a line at the bottom, as well as a rectangle for the number.

    We finish drawing the license plate, detailing the lines of the car

  10. Add several lines to the car windows, as well as a door line.

    We complete the picture by drawing the doors and parts of the front of the car.

Video: two racing cars drawn from the cells of a notebook sheet

How to draw a fire truck

Modern fire engines are significantly different from those that first appeared in 1904. The old cars could accommodate 10 people and practically nothing of fire equipment. But modern models are so spacious that they have plenty of fire extinguishing equipment built into them.

Instructions:

  1. We draw three parallel horizontal lines, which we divide in half with one vertical line.

    For a fire truck you need to make four auxiliary lines

  2. In one part we draw the cabin, starting from the upper part, and then drawing the lower part, which is almost half protruding.
  3. Along the bottom edge we make a recess for the wheels.
  4. We depict the body in the form of a rectangle, with recesses for the wheels along the lower edge. The height of the body is half the height of the cabin.

    We start the drawing with the cabin and body outlines

  5. Draw the wheels.
  6. We mark the two right doors of the cabin.
  7. We finish drawing the stairs on the body.

    In the wheels, don’t forget about drawing the rims; you can use a ruler to draw the stairs

  8. We add headlights, as well as a coiled fire hose, which is attached to the side.

    We complement the drawing with a fire hose and the inscription 01

  9. The drawing is ready, you can color it if you wish.

    The car can be painted with a simple pencil, but if you use paints, felt-tip pens or colored pencils, the main shades will be red and white

The next way to draw a special equipment car will be interesting even for those guys who are not very good at drawing.

Instructions:

  1. Draw a rectangle and divide it vertically in half.

    The basis of this machine will be a rectangle divided vertically in half.

  2. On the left side we draw the cabin, draw double lines to draw the windows, and draw handles.

    On the left side we draw a cabin with double lines of windows

  3. We make windows on the body. To do this, we make the lower border just above the bottom of the cabin windows.

    Drawing windows on the body

  4. On top we add a rolled up fire hose and a tank.

    We finish drawing the tank and a rolled-up fire hose on the body

  5. We finish drawing the wheels and make the lines double.

    Drawing wheels

  6. We install a flashing light on the roof of the cabin.

    We finish drawing the flashing light and inventory details

  7. We complete the design details of the special equipment vehicle (for example, fire extinguishing tools that are attached to the outer wall of the lower rectangle).
  8. Delete contour lines, and draw the main ones with a soft pencil or felt-tip pen.

    The car can be painted or left in the version with outlined contours

Video: how a child over 3 years old can draw a fire truck with a marker

Drawing a police car

Depicting a police car is a tricky business. To simplify the drawing process, it is recommended to start with auxiliary elements. In addition, for this drawing we will need a compass.

Instructions:

  1. In the center of the sheet we draw two rectangles connected by a common horizontal line. We will draw within the boundaries of this figure.

    We start the drawing with two rectangles

  2. The upper rectangle is the car body. We show its shape with an arc.

    Showing the shape of the body with an arc

  3. Add the front part of the car - the hood.

    Finishing the hood line

  4. We connect the body and the hood with a soft smooth line. We erase the auxiliary lines of the rectangle in this area.

    We connect the body and hood with a smooth line

  5. Let's give it shape. We draw holes for the wheels, and turn the line separating the rectangles into a line that “separates” the top from the bottom of the car.

    Slightly tilt the line of the front part and draw recesses for the wheels

  6. We add a line for the trunk, rear suspension, as well as a line separating the windshield from the car body, and two vertical lines for the front door.

    Add a line for the trunk and front door, and also separate the hood from the windshield

  7. Use an eraser to erase all the extra lines, leaving only the outline of the car itself.

    Removing auxiliary lines

  8. Using a compass we make wheels.

    Drawing wheels using a compass

  9. Draw the lines of the window frames, using a ruler if necessary.

    To depict windows, use a ruler if necessary.

  10. We supplement the wheels with circles for the rims.

    Draw contours and color if desired

Video: how to draw a police car without auxiliary lines

Photo gallery: drawing a Bugatti Veyron

We start the drawing with the base figure. We draw the contour lines of the supercar, as well as the bumper, side body kit, wheel arches and hood. We draw the contours of the headlights, three front air intakes, windshield and side windows, as well as the line of the driver’s door and another air intake. We detail the model: we start with the meshes. front air intakes, then move on to the headlights, rear-view mirrors, fuel tank cap, and finish with the wheels. Finish drawing the rims and tread on the wheels, remove the auxiliary lines. Draw the lines of the car.

Photo gallery: how to draw a convertible

We start with a sketch of the outline: the upper part has an oval shape, and the lower one consists of straight lines of different angles of inclination. We check the angles of inclination. We draw the front bumper, the right fender and the holes for the wheels of the car. We draw the windshield, the passenger side mirror and the interior of the convertible. We add fog lights and more. we draw in detail the hood of the car, the windshield We draw the side doors on the passenger side, the contours of the rear bumper, the interior of the car and the seats for passengers, after which we draw the folded roof of the car We finish drawing the wheels We draw the rims on the wheels of the car, paying attention to the symmetry of the spokes, we remove the auxiliary lines We draw the contours and optionally paint the car

Drawing a car with paints

If you plan to paint the picture with paints, then it is better to take a watercolor sheet of paper - this way the strokes will be smoother and more beautiful. Otherwise, recommendations for making a drawing in paints will be as follows:

  • you need to fill the contours with color only after the pencil base has been completely completed;
  • before coloring, wipe off all auxiliary lines - they will interfere;
  • if, in addition to the car, there are other elements in the drawing, then it is better to start with large details of the environment (roads, trees on the side of the road), but it is better to leave those objects that are in the background for last.

This is interesting. Models of toy cars can be drawn without pencil outlines, that is, directly with paints. And it is more convenient to do this with gouache, since the color is saturated and the contours do not blur, as in watercolor.

Higher philological education, 11 years of experience teaching English and Russian, love for children and an objective view of modernity are the key lines of my 31-year-old life. Strengths: responsibility, desire to learn new things and self-improvement.

Drawing is my favorite children's activity, this is how they express their vision of the world. The child is full of ideas about what to draw. Children often try to imitate their loved ones fairy-tale heroes or cartoon characters; family members, toys. But implementing an idea can be difficult. At this moment, parents come to the rescue. They tell you step by step and explain how to achieve the desired result.

Boys of all ages love cars, so from an early age they have the question: “How to draw a car?” Sometimes girls too preschool age have the same preferences in topics visual arts. When telling you to make a drawing, you need to take into account the age of the child; the older he is, the more complex technology you can choose. Below, we tell you how to draw a car with a pencil step by step.

How to draw a car for children under 5 years old

If your child has already started asking the question “How to draw a car,” suggest starting with the simplest option.

You should start with an image of a passenger car, because it is best known to little artists.

  • To begin, provide your child with necessary tools: a piece of paper and a pencil.
  • Invite him to draw a rectangle and a trapezoid on top of it.
  • The trapezoid is the top part of the car, so at this stage the child should draw the windows in the center of the figure. And at the bottom of the rectangle you need to draw wheels.
  • Make sure that the artist does not forget to depict the headlights in front and behind, as well as the visible parts of the bumpers in the form of small squares.
  • Can not imagine vehicle without doors, so now is the time to start depicting them. To begin, have your child draw vertical lines. To make it more realistic, the child can draw a small stripe in the front window; this will be the visible part of the steering wheel. Remind them about the tires and ask them to highlight the arches above the wheels. This will give the picture more realism.
  • On last stage, you need to erase all unnecessary lines. Give your child the opportunity to do this on their own. And only if nothing works out, offer help.

The image is ready. If desired, you can decorate it using colored pencils, paints or felt-tip pens.

For those who have already mastered the previous drawing, you can learn to depict more complex car models, such as a truck. The child will be pleased with the opportunity to master this technique, since any boy has in his toy collection trucks or dump truck.

As in the previous case, the process will consist of several stages.

  • First you need to draw two rectangles: one is slightly larger than the other. At the bottom left, you need to draw semicircular recesses.
  • It's easy to guess that the recesses are needed for wheels. Therefore, at this stage, you should start depicting them. The child should draw two small circles under the notches.
  • After this, you need to extend the semicircles and get circles bigger size. These will be the tires. The top small rectangle is the cockpit, so the figure needs to be adjusted accordingly. For realism, don't forget to add windows in the cockpit.
  • In the appropriate places behind and in front of the rectangles, mark the headlights and visible parts of the bumpers.
  • The work is finished. Now the kid can show his creative imagination and decorate the truck at his own discretion.

How to draw a car for children over 5 years old

For older children who are already familiar with simple techniques images, you can try to depict more complex models.

Children over 5 - 7 will be interested in learning how to draw a racing car, Cadillac or other complex car.

We suggest learning how to draw a pickup truck:

  • As in previous cases, you should start from a rectangle, but this time it should be long enough.
  • At the bottom front and back we denote the wheels in the form of circles. At the top of the rectangle, near the left edge, the cabin is indicated.
  • Now two more similar figures of smaller diameter are depicted inside the circles. Once that's done, you can start shaping the bumper and sketching out the fenders.
  • We must not forget about the windows in the cockpit. The process also begins with a rectangle, one of the sides of which will be inclined. The straight line indicates the windshield.
  • To make the pickup truck look realistic, don’t forget about the details: mirror and door handle. And inside each of the wheels there are five semicircles.
  • The child must designate the door and molding to his liking. Optional young artist Can finish drawing the gas tank and headlights. Part of the steering wheel may be visible through the window.

When the baby masters all the techniques described above in order to develop his Creative skills, resort to educational video lessons.