What colors need to be mixed to get white. How to get orange color by mixing paints

Brown is universal color, which has many possible uses, but is not always found in art supply sets. Luckily, different shades of brown can be created by mixing the three primary colors: red, blue and yellow. Just mix these three primary colors and you have it. Brown color. You can also start with a secondary color, such as orange or green, and add a primary color to it until you get brown. To achieve the shade of brown you want, add more of one of the primary colors, use a little black, or mix two or more different shades.

Steps

Mix primary colors in equal proportions

    Squeeze a small drop of each color onto the mixing surface. Place red, blue and yellow paints next to each other on a palette or piece of paper. The exact quantity depends on how much brown paint you need. It is important that there is an equal amount of each paint.

    • Leave some space between flowers. This empty space in the middle is where you will mix your different paints.
    • To get brown from primary colors, you just need to mix them in equal quantities.

    Advice: In principle, this combination can be used for oil sticks, watercolors or colored pencils, but the final color may not be uniform, since they are more difficult to mix.

    Mix the colors completely. Run the tip of the palette knife along the inside edges of all three paints to bring them toward the center. Then use the flat bottom surface of the tool to mix the paints using increasingly wider circular movements. At the same time, you will notice that the mixture gradually acquires a rich brown color.

    Add a little white to give the brown some depth. Once you have mixed the paints and got a brown color, add some white paint and continue mixing until it is completely gone. Be careful not to use too much white paint - generally no more than ⅓ of the total paint is needed.

    How to get brown from secondary colors

    1. Mix red and yellow together to get Orange color. Start with enough red paint and add yellow paint little by little until you reach a 1:1 ratio. At the same time, mix the paints until you get a dark orange color.

      • To make the brown color dark enough, you can use a little more red paint.
    2. Mix orange with blue to get brown. Use a little less blue than orange - the proportion of blue paint should not exceed 35-40%. Mix the paints thoroughly until you get a chocolate brown color.

      Mix red and blue to make purple. Use these two colors in approximately equal proportions. The perfect combination of red and blue will produce violet, and if you deviate from the exact proportions, you will end up with purple or a similar red tint.

      • Getting the right purple color is quite difficult. If the final mixture has a reddish or bluish tint, add a little of the opposite color to achieve balance.
      • If you add too much blue paint, the purple color will be more difficult to correct. It is easier to achieve the right shade with an excess of red.
    3. Add yellow paint little by little to the purple until you get a brown color. As you mix the paints, you will notice a dirty brown tint beginning to emerge. Continue adding yellow paint in small increments until you get the color you want.

      Mix blue and yellow to make green. Squeeze out a large drop of blue and add yellow paint to it little by little. As with orange, you should start with the most saturated green and move towards the middle of the spectrum.

      • For best results The green color should be closer to dark blue than light aquamarine.
    4. Add the right amount of red paint to green to get brown. Mix in just a little red at first and continue adding and stirring as needed to get a darker color. A mixture of green and red can range from an earthy olive brown to a warm burnt orange hue.

      • To get the most “real” brown color possible, the mixture should contain 33-40% red dye. If the proportion is equal, red will slightly predominate.

      Advice: The brown color obtained from a mixture of red and green is perfect for landscapes and images of nature.

      How to get different shades

      Add a little more red or yellow paint to give the brown a warmer tone. If you want to lighten or enhance the brown, simply add a small amount of one of the warm primary colors. Add paint in small portions and stir continuously until you get the desired shade.

In this article we will look at what needs to be mixed to get brown color in paints.

Such a noble and calm color as brown has always dominated the clothing of rich and noble representatives. By the way, its main characteristic is stability and stability. But often the palette does not have this color or its required shade. Yes, and young or even experienced artists must be able to select the right colors in order to independently create a color scheme of the brown spectrum. And our recommendations will help in this aspect.

How to get brown color when mixing: 3 ways

Before rushing to the color scheme and brushes, you need to remember what colors there are. They are divided into two groups – basic and additional. There are also two more subgroups - composite and complex. All of them make up the design of four groups of basic colors.

Remember - primary colors cannot be obtained by combining any palettes. By the way, they are the ones that become the basis for creating other colors. Moreover, having black and white on hand, you can extract absolutely any color.

IMPORTANT: Brown belongs to the group of complex colors.

We offer three basic methods for obtaining brown color.

Green (blue+yellow) with red

  • Even schoolchildren know that brown comes out when you mix two colors together - green and red. This is the case if we talk about the primary and composite colors.
  • But the challenge is still to create a green tint. As easy as pie! Take two primary colors - yellow and blue.
  • You need to take an equal amount various shades. But take into account your wishes.
    • If you want to end up with a darker color, then add a little more blue, but to the finished green color.
    • If, on the contrary, you want to make a more transparent shade, then initially take a little more yellow.
  • After receiving secondary color Let's start making the tertiary one. To the green color you got, you need to add a little red tone.
  • It is important to introduce red paint, and not vice versa! After all, it is the fundamental tone that regulates the degree of darkness and saturation brown tint. If you add too much red coloring, then you will get more of a brick tone.
    • But also keep in mind that the red color makes brown so warm (in large quantities it can even create a rust effect), but green, on the contrary, will make it even a little grayish and cold.

Orange (yellow+red) with blue

  • The first thing you need to do is take red. And add yellow to it. By the way, it needs to be introduced gradually and in small quantities.
  • On average, yellow should be only 10% of the volume of red. It's important to get a dark orange. But keep in mind that too much red coloring will create a reddish brown color.
  • Blue paint will need even less - 5-7% of the total volume. You also need to add gradually, in small portions and stirring the ingredients well.
  • Of course, adjust the tone and saturation of the brown color using the blue tint.

Violet (red+blue) with yellow

  • Red and blue colors should be taken in equal quantities. Then you can get a noble and even royal shade purple, which will have the desired richness and warmth.
  • Then you need to introduce little by little yellow. It will lighten the resulting purple, so keep an eye on the amount. If the color is predominantly yellow, then the brown color will be lighter and warmer. Purple tone acts in the opposite way.

IMPORTANT: Too much yellow paint will create an ocher tint.

How to make a light brown color from paints, gouache when mixed?

To get a light brown color, you need to give the yellow color a predominance. But! Let us repeat that too much of it will make the color look like ocher. And, of course, it all depends on the desired lordship.

  • To whiten brown color, you need add white. Yes, it's that simple. The more you add, the lighter the final color will be.
  • But don’t overdo it, brown is a warm color and white will neutralize this characteristic. Therefore, introduce very carefully, gradually and in small portions (literally, 1% of the total mass of paints).
  • Although adding the previous color will help correct the situation.

How to get a dark brown color when mixing paints and gouache?

If we talk about previous mixing options, more blue or green will make a darker brown. But they will also add their own nuance. There is another, simpler and quick way obtaining a dark brown color.

  • Just add black paint. But you need to work with it extremely carefully, since a small dose of excess paint will simply turn it into black.
  • Therefore, add paint in tiny portions and take note of one rule - conduct experiments with a small amount of paint.


  • By the way, so as not to make a mistake with in the right color, mix a little black with white. But leave the dominance of the first shade. Just make it a little softer as it can quickly eat up the brown color.

How to get chocolate when mixing paints or gouache?

To create a chocolate color, you need to tinker a little. The most unencumbered scheme is to choose the right tones of orange and blue. But there is another possible option.

  • Combine yellow and blue paint to get a dark green color. In another bowl, combine red and drop yellow tone to create orange.
  • Now combine the two resulting colors. And in the end you get the color of green grass or grass green.
  • Now you need to create a bloody red color. To do this, combine the same orange and red palette.


  • In conclusion, it remains to combine the two complex colors obtained.
  • And as a result we get the color of real chocolate.
    • If you want milk chocolate then add a drop of white paint
    • A mixture of white and yellow will give an additional golden tint to the color
    • Dark chocolate is again obtained by adding black paint.
    • But yellow with chocolate will help you get a beautiful and even brown color

How to get coffee color when mixing paints or gouache?

  • Coffee color can be obtained by adding the same black gouache. Also, you need to mix according to technology - orange paint plus Blue colour. In this case, you can achieve the desired tone.


Getting coffee color
  • Alternatively, you can achieve the desired color using a composition of purple and orange paint. If necessary, you need to add a drop of black tint.

Color mixing: table

For clarity, we would like to provide you with a table that will show all possible versions removal of brown color and its range. To get a brown color, you need to mix the component colors, adding the main shade to them. True, there are other options where the composition includes not just secondary colors, but even complex palettes.

Working with paints, getting different color schemes, thereby conducting experiments - interesting activity. A simple person can get carried away - an amateur, a professional artist. Experimenting, creating and enjoying the process is great! In this article we will also try to experiment. Let's find out what happens when you mix red and yellow.

It must be remembered that there are 3 main paint colors - blue, red and yellow; they cannot be obtained independently.

And the rest obtained by mixing are shades. What happens when you mix red and yellow? What color will it be? By mixing primary colors, secondary shade results are obtained. For example, if you mix:

  • blue and red, you get an excellent purple tone;
  • yellowish with red – orange;
  • blue with yellow - green.

It is impossible to get black and white on your own - these are exceptional tones. If you add white to the paint, the shade will change and will look much lighter, but if you use black, the opposite effect will occur.

Mixing table

Basic tones Mixing Nuances
Rich red color and yellowish tonality quite bright Using one part red and two parts yellow, you get a bright orange color.

Adding large quantities yellow becomes lighter, and when adding red it becomes darker

White, brown and yellow Take an equal percentage of paint, you get the perfect beige shade When using white in greater quantities than indicated, the tone will be lighter, and when using brown, on the contrary, it will be darker
Red, yellow, green and black If you mix these tones, you get an excellent mustard color. Of course it will be lighter when adding yellow and darker when using a large percentage of black
Brown, yellow and red If you take 2 parts brown and yellow and one part red, you can get a golden hue It will be brighter and more saturated if you use a slightly higher ratio of yellow paint.
Yellowish and brown If you take one part brown and two parts yellow, the color you get is ocher. The tonality changes depending on the amount of adding a particular shade
Red and white If you mix these colors, you get pink color You can vary it by adding red or white, depending on these conditions and get the saturation of shades

The required paint tones are not always available retail sales, That's why the best solution will receive them himself.

When deciding to get a color scheme at home, you need to be patient and also have a good mood. This manifestation of independence has some advantages:

  • You can get positive emotions from experiments.
  • It is not forbidden to vary numerous times.
  • You will still get the desired color.

On video: how to mix colors.

Any artist knows that a picture painted with his own hand must be alive and the appropriately selected tones must also be natural, which are obtained using trial methods.

The perceived painting should not contain more than three colors of paint, then it will be an artificial masterpiece.

In order to carry out work on mixing tones efficiently and the result exceeds all expectations, you need to know some rules:

  • Do not mix paints made using on different basis. For example, on oil and water, everything should be uniform. Otherwise nothing will work out.
  • It is not recommended to use expired coloring agents, as the pigment in them has settled to the bottom and is unlikely to mix with the base again.
  • It is very difficult and almost impossible to choose the same shade that was previously there. In rare cases, this can be done by professionals, but for amateurs it is best to prepare a new color scheme.
  • Before directly mixing the paints, it is necessary to thoroughly stir each color separately, so the quality will be clearer.

Based on the resulting shade, if necessary, you can conduct research again any number of times, adding different shades. But you should follow these tips:

  • To avoid getting stained with paint, it is recommended to have a solvent.
  • Work must be carried out in a specially designated place.
  • Sufficient lighting in the room will also contribute to excellent results.

Color combination (2 videos)


Hair coloring is based on a scientific basis - knowledge of color and chemical laws, the skill of a hairdresser-colorist.

Modern coloristics – fashion for uniqueness and absolute individuality

Colors are divided into several varieties, the main ones of which are:

  • armoring;
  • highlighting;
  • balayage;
  • ombre

When blonding, the master carefully distributes various shades of light tones over the entire length of each strand of hair. This look looks beautiful on light brown hair.

Bronzing on light brown straight hair. Results before and after coloring

When performing hair highlighting, the hairdresser bleaches the selected strands. The number of light strands depends on the client’s wishes and can range from 10% to more than 50%.


Highlighting on dark hair

Sometimes, for dyed strands, the shades obtained during dyeing are additionally neutralized using color rules.

When performing the ombre technique, the master achieves a smooth transition, starting from the very dark root zone to the lightest ends of the hair.


Long straight hair dyed using the Ombre technique

Features of color according to appearance color types

To obtain the required tone, the paint is diluted with certain pigments:

1 package of paint (60 ml) corrects the color with 4 grams of pigment. If you get an ugly or not the desired hair color, experts do not recommend lightening it; you will end up with a dirty, unattractive color.

In this case, it is better to correct the coloring by professional craftsmen who have extensive experience and the necessary funds.

Why is it important to know color theory, about color combinations, how to apply it in coloristics

It is important to know! For hair coloring, mixing dyes and colors, it is important to select matching tones and combine them in exact proportions. Professionals mix paints that are similar in tone and that meet the rules of correct combination:

  • copper shade with brown;
  • eggplant with dark purple;
  • caramel with golden brown.

It is not allowed to mix more than 3 paints of different colors. The hairstyle will gain contrast if you apply white strands to dark hair.

Note! Proper mixing of paints and colors in color scheme can visually change the shape of the face and adjust parts of the hairstyle with certain color shades.

Rules for mixing paints of different shades

Experienced professionals who know the rules of the most complex technology for mixing different shades of paints know how to evaluate:

  • hair – condition, structure;
  • scalp – sensitive, dry, irritated.

Experts note 4 color types: cold - summer and winter, warm - autumn and spring.

It is undesirable to change the natural color type to the opposite one.

For fair-haired women belonging to the “summer” color type, it is better to dye with wheat, ash and platinum tones. Dark-haired representatives of the fair sex belonging to this color type will suit various brown tones.

Blonde hair of the “spring” color type is dyed with dyes that match the natural color, golden and honey tones. For dark hair Caramel and nut are chosen for this color type.

Bright representatives of “autumn” are especially suitable for rich tones of colors – red, golden, copper.

Experienced stylists determine the color scheme of hair dyes based on the eyes.


For those with gray-blue eyes, light hair colors are best suited.

Green-eyed women are offered warm shades. If there are yellowish inclusions in the iris of the eyes, paint in the orange and red palette is recommended. If the eyes have a malachite tint, a chestnut, dark brown tone will harmonize.

At blue eyes light colors look nice. Brownish inclusions on the iris of blue-eyed people suggest coloring with caramel or red shades. Bright blue eyes - brown tones work well. Gray-blues are best painted in light colors.

For dark brown eyes with dark skin– chestnut or chocolate tones. If you have dark brown eyes and light skin, you should paint them with red shades. For light brown eyes, golden tones are recommended.

All shades suit gray-eyed women, but it is better not to use too dark shades.

Mix dyes for hair coloring with colors of the palette that are similar in tone, precise selection is carried out using the attached color shade tables.

You cannot mix paints produced by different companies.

Manufacturers have their own palette, different from others. The desired result is obtained by correctly calculating the proportion and amount of paint.

For unevenly colored and gray hair, experts recommend that you first dye it a natural color, and then select and mix shades. On hair of different types and textures, the same shades look different, and time exposure affects the color saturation.

It is forbidden to dilute paint in metal containers; glass, ceramics, and plastic are suitable.

In what proportions should you mix paints?

Apply to hair of different lengths different quantities paints:

  • short hair – 1 package (60 ml);
  • medium hair – 2 packs (120 ml);
  • long hair – 3 packs (180 ml).

To obtain the shade indicated on the package, add a 3% oxidizing agent when diluting the paint. When mixing hair colorants, take them in equal proportions or add large quantity paint, the color they want to receive.

For example, when mixing caramel and golden brown, adding more golden brown creates a richer golden shade.

Important to remember! The color palettes developed by manufacturers are paints that are complex in tone, containing different quantitative contents of pigments: gray-green, blue, red and yellow.

The molecules of these dyes vary in size:

  1. The smallest molecule belongs to the gray-green pigment, which colors the hair and is the first to be distributed in it.
  2. Next in size goes blue, which will be the next one to occupy a place in the hair structure.
  3. Red is larger than the first two, it still has a small opportunity to take up space in the colored hair.
  4. The yellow pigment is the largest pigment; it has no place at all in the inner part of the hair, it envelops its outer side. The shampoo quickly washes away the yellow pigment.

Composition of dyes - what is important to know?

Undyed natural hair contains 3 primary colors. Their different combination determines the natural hair color.

Three primary natural colors: blue, red and yellow

In hair coloring, when mixing dyes and colors, the range of colors is distributed according to levels from 1 to 10: starting with 1 - very black and ending with 10 - the lightest. Hair from levels 8-10 contains 1 yellow pigment, from levels 4-7 there is red and yellow color, resulting in brown shades.

The highest levels 1-3 have a blue pigment combined with red, yellow is completely absent.

Hair dyes from all manufacturers are indicated by numbers, and their tone is determined by them:

  • the first is belonging to the degree of lordship;
  • the second - to the main color (up to 75% of the paint composition);
  • the third is the nuance of color.

Secondary colors

By mixing adjacent colors they acquire secondary colors:

  • orange – yellow and red;
  • purple – red and blue;
  • green – blue and yellow.

Each of the 3 primary colors has an opposite color (countercolor), helping to neutralize various shades:

Each of the 3 primary colors has a countercolor
  • red is extinguished by green;
  • blue – orange;
  • yellow – violet.

Professionals calculate and remove unsuccessful shades using this principle.

Tertiary colors

By connecting the primary and secondary color boundaries, tertiary shades are acquired.

When coloring your hair, mixing dyes and colors, you get beautiful shades, for example, combining a beige shade with a cold violet - exquisite platinum. Blonde with gray-green hair corrected by adding red, the redness is neutralized with a tobacco tint.

Important to remember! On completely bleached hair, the desired shades are not obtained; they become lighter, for example, purple shade on white hair it turns into lilac. With a low content of yellow pigment in the hair, the result is:

  1. The pink color takes on a reddish tint.
  2. Lilac neutralizes yellowness, platinum remains.

Darker shades appear on natural, undyed hair.

Harmonious colors

The harmony of nearby colors is the presence of one primary color. Harmonious colors are taken from the intervals of one main color to the next main color. They have 4 subspecies.

The harmony of these colors leads to balance, changing their lightness and saturation when coloring the hair, mixing paints and colors. When adding white or black colors to them, the combination becomes harmonious, highlighting one rich color.


The Oswald circle is the basis of color, which determines the laws of shade formation. Mixing dyes and colors to change hair color is carried out in accordance with its recommendations

Monochrome colors

With a monochrome combination, there is a combination of colors of one color range, with light and rich shades. In hairdressing, a similar calm combination is often used.

Achromatic colors

An achromatic combination of colors is essentially close to a monochromatic combination; in some sources it is not distinguished separately. It is based on two or more achromatic colors.

The classic combination of this harmonic series is a gradual transition from white to black. Hairstyles done in this style emphasize dignity and stability.


Achromatic color combination

Complex color shades Each manufacturer produces using different proportions, which gives the product its own shade.

Some companies add a neutralizing pigment, but not always. The difficulty of staining to obtain desired effect– carefully study the composition of paints.

Ash shades

Ash shades are popular in hair coloring in salons, especially with ombre.

The results of staining with ashy shades may differ from those expected. Therefore, a number of nuances should be taken into account :

  • an ashy shade on bleached hair looks overly gray or dirty;
  • it darkens the hair;
  • in the presence of yellowness it creates a green tint;
  • suitable for young girls, other women look older.

Ash shade is most suitable for young girls

The skillful hands of a professional will help you avoid side effects and get the desired result by taking into account the following features of ash paint:

  • the ashen shade contains a lot of blue pigment;
  • a feature of the paint is that different manufacturers have different shades;
  • ash shades from different companies vary in pigment density;
  • This paint, when lightened, removes the orange tint.

Before you start coloring your hair, you should determine a few points:

  • correctly set the depth of tone in the hair;
  • understand what hair color the client wants to get;
  • decide on additional hair lightening;
  • understand whether after the procedures there will be an unnecessary shade that needs to be neutralized, and determine the color.

It is important to correctly determine the level of hair tone depth

Hair coloring, mixing several colors various colors in hairstyle helps to create a unique individual image. This type of coloring is suitable for hair of different lengths: from short creative haircuts to beautiful curls.

Experts insist on maintaining a sense of proportion so that there is no overflow of tasteless bright spots. The theory of color, an invaluable practice that brings experience, helps masters maintain balance.

Qualified hairdressers warn - You cannot experiment thoughtlessly without a clear knowledge of the laws for obtaining color combinations.


Hair dye mixing table

How to properly dye your hair using color techniques

Before coloring your hair, mixing dyes and colors, follow the advice of experts:

  1. It is not recommended to use masks for a week before coloring, as the special substances they contain envelop the hair and can change the expected coloring result.
  2. Do not wash your hair before dyeing: the skin on your head will not be damaged by the oxidizing agent, thanks to the released fat.
  3. The dye is applied to dry hair; wet hair dilutes it; the color will lose its saturation.
  4. For easier distribution of dye, the hair is divided into strands and the dye is applied evenly and quickly.
  5. The paint is reapplied, first to the root zone, after 20 minutes, spread over the entire length.
  6. Perform the procedure wearing gloves to protect your hands.
  7. Wash off the paint gradually, moisten, foam. Then rinse your hair with shampoo and apply conditioner.

Paints must be intended for professional use and belong to the same manufacturer .

Mixing dyes and colors in hair coloring should be done step by step:

  1. Read the instructions carefully. Mix the colors separately.
  2. Mix paints together in the selected proportion.
  3. Stir the composition thoroughly and distribute the mixture throughout your hair. The paint is applied immediately after preparation, because... The shelf life of the diluted coloring composition is short.
  4. Keep the dye on your hair according to the instructions, then wash your hair.

Note! Divorced and mixed paints cannot be stored. After 30 minutes, a reaction will occur with air masses and the paint will deteriorate. The multi-colored mixture must be used in one go.

The records determine:

  • the color you like, no need to remember what shades were used when mixing;
  • duration - how long the coloring does not wash off;
  • unsuitable shade - which colors should not be mixed.

Professionals warnIt’s difficult to get rid of some color tones. First, you will need to remove the color you don’t like, and then dye your hair again. These actions will affect the condition of the scalp and hair.

By consulting with experts, you can understand which colors suit your skin type and face shape best and find a special individual hair color that emphasizes your unique personality. female image. Be healthy and beautiful!

Useful video materials on the topic: Hair coloring. Mixing paints and colors

How to mix hair dyes correctly:

A short course on the basics of color:

You can see how to choose a hair shade here:

When choosing paint for the interior, even for watercolor drawings, it's easy to make a mistake with the shade. Paper testers may not match the tone in reality.

Don't worry, there is a way to achieve the desired shade! Read on to find out what paints to mix to get blue.

In contact with

Creating a classic shade

Unfortunately, no matter what components are mixed, without the primary tone itself it will not be possible to even come close to creating the required shade .

Red and yellow colors follow the same rule.

If the color in your palette is too dark, then white paint will help to lighten it a few tones.

If, on the contrary, you need to darken the shade, then you need to add more dark tones to the mixture - black, gray or brown.

Important! If you are mixing colors to create a small pattern in the interior, then you can mix them in a small bowl by hand. If you want to paint an entire wall, tint the ingredients in a bucket using a mixer.

How to maintain proportions

How to get blue color by mixing:

  1. Get delicate ultramarine by mixing blue and white parts in a 3:1 ratio.
  2. To create a shade with a slight blue, increase the portion of white color. The ratio of blue to white is 2:1.
  3. To obtain a more transparent, light tone, mix them in equal proportions.

WITH Hello! The heavenly color is perfect for painting a boy’s nursery.

A turquoise tone will help you get a more saturated heavenly tone.

A complex recipe of three ingredients will help create color sea ​​wave. How to make blue using turquoise and white? Take 2 parts blue paint, 1 part white and turquoise. Enjoy the blue of the sea.

This is interesting! Red, blue, yellow are called primary, because by mixing other tones it is not possible to achieve the desired shade. Why do you need to know what colors need to be mixed to make blue? To achieve a play of shades and original texture, create artistic masterpieces.

Dark shade

In the case when you want to make the color darker, the mixing recipe is a little more complicated. It all depends on what the final result is and how rich the tone you are trying to achieve. How to successfully mix different tones to get a dark blue color:

  1. You will need two paints: black and aquamarine. If the tone is made to decorate parts, then stir the mixture with a brush or stick in a small container. To paint walls, you need to tint the shade with a construction mixer, a special attachment for an angle grinder.
  2. There are no exact proportions. Add black color to the base paint drop by drop or a few milliliters.
  3. It is better to test the resulting mixture on a sheet of white paper and let it dry. If you are satisfied with the shade, then stop tinting. If not, add even more black.

Advice! Did it get dark? Lighten the mass by several tones using white. Stir in gradually so you don't have to add black again.

Violet

Ultramarine is similar to artificial, which does not occur in nature. Purple will help create paint the color of a dark sky. Magic coloring will help create an interesting tone that can be used to paint the ceiling in the nursery, and bright luminous star stickers will create an imitation of the night sky. How to get blue from purple:

  1. Mix blue paint with purple in proportions 3:1.
  2. For the ceiling, knead the dye with a construction hook for about 10 minutes.
  3. Test the finished mixture on a small section of the wall. Do not forget that you need to apply the interior color in 2-3 layers.


A woman's favorite shade is royal ultramarine.

To get such a noble tone on the verge of night blue and sea wave, you need an acidic violet color or pink. The recipe is similar to the previous coloring:

  1. You will need 2 tones: acid violet (pink) and ultramarine.
  2. The proportions of blue and pink are 3:1. Sometimes you need a little more pink.
  3. Evaluate the result by applying the dye to a small area.

Advice! To get purple, mix red and blue in equal proportions.

From yellow

To create an emerald blue color based on ultramarine, you need yellow. The resulting shade is similar to glitter precious stones. It is appropriate to use it for decorating small elements to create a fantastic picture. How to get blue from yellow:

  1. Mix yellow and ultramarine colors in equal parts.
  2. For a pastel look, add white. The proportion recipe depends on the desired degree of pallor.

Advice! To create a fantastic shimmery color, do not stir the paint too thoroughly. A lazy tinting method will create an interesting mother-of-pearl effect.

From green

Prussian blue is a favorite of designers not only for interior design, but also for clothing.

The deep color is associated with the depths of the sea and a distant galaxy. How to easily turn green into blue:

  1. We combine two colors: aquamarine and green in equal parts.
  2. Mix using a technique to ensure uniform texture.

Surprisingly, when adding a third white ingredient, the color does not fade.

How to make paint the right shade

What if there is no main color, but you need to make blue paint? An interesting tone, similar to sapphire shine, is obtained by mixing red and Green colour. This tinting will not give pure ultramarine, but by adding black and white paint you can achieve interesting and unusual shades.

Useful video: how to mix colors

Combine combinations of warm shades with delicate pastels, blue tones with cold ones. Change the proportions to your liking; proper tinting is the key to successful repairs. Experiment and create your own color scheme!