Runa Fehu is a strong money talisman. Fehu: activation, meaning, purpose

I came across a wonderful article online. I would like to offer it to you...

“Here are collected methods for activating runes, staves, plus my recommendations.
(a small part of the information was taken from another forum)

1) Classic runology.
In the classics, runes were carved on wooden planks - dies, which later also began to be called “stav”, “stafur”.
The tree was cut fresh, most often it was oak, pine - judging by the sources.
This is how several trees are usually chosen - birch gives peace and connection with ancestors, oak - the strength of the stand, ash feeds information, gives durability and strength to the stand (for attack), alder will prolong the action of the stand (strengthens it, for protection), pine - for protection, spruce - as a symbol of birth and death, rowan - active protection, willow - in female magic, to induce negativity, a symbol of grief, hawthorn - in love spells/lapels, heather - for cleansing, maintaining feelings, holly - tree of equilibrium, balance, apple tree - well-being, love, peace, etc.

From yourself: ask the tree to give you a branch for a die, leave three coins (heel) in the hole at the roots, you can put a bun and stick a candle in it.
Then the runes are cut on the die with a knife, the blood is poured strictly into the groove, and a galdr spell is recited, stipulating the action of the stav. It is usually read facing North (or according to the type of deities and their location relative to Midgard). For example, when calling on the Force of Hel, look down and north.
Bones also proved to be good for runescripts, especially flat, non-hollow ones - jaw, shoulder blades, etc. Even stronger than runes on a tree. It is best to take old bones, not fresh ones, so that the animal does not take revenge.

Important: in later Icelandic witchcraft, the finger from which the blood was taken, the day of the week, the position of the Moon/lunar day, and the number of runes in the stave matter. Much of this is purely individual.
For example, I would recommend doing treatment on the waning moon in order to get rid of the disease, and for prosperity - on the ascending one. For damage - “no moon” (new moon) or during an eclipse, again “black moon”, “blood moon”, etc.
A complex ritual - on the full moon. But all people react differently to lunar cycles, so I recommend choosing it yourself.

I recommend the finger for general strong witchcraft - the middle right one. For destruction - the left index finger.
Nasal septum - blood is taken for victory and good luck.
The bridge of the nose - for protection against chronic ailments associated with "obsession" and "loss of soul."
Again, it is now impossible to reconstruct what exactly the fingers of the Scandinavians meant, but according to classic options many traditions: the left hand is negative, the right hand is positive, the left side is spiritual world, right - material.
Start from this.

In Late Icelandic witchcraft, the role of blood was replaced by saliva. It can also be menstrual blood and male sperm (no matter how disgusting it may sound, this is already used for love spells), even morning urine. But I think it’s better to stick with blood and saliva.
The number of runes can be taken from numerology, or, for example, according to the principle of odd - good, even - bad (as when buying
flowers =)). Again, everyone decides for themselves.

2) Modern methods.

During the activation procedure, you must say out loud or to yourself: “I created this becoming, called ... for this and that ...” and preferably “I activate it through ... (flame, breath, spirits, the power of gods, clan or ancestors - and other options). recharge. Don’t be afraid to speak, but don’t say too much. For example: “Let the enemy feed himself with his own strength and let it weaken him, and let him feed the power of the stave himself and...”

From myself: A reservation is a way to express in words the actions of runes. It can be anything, but it’s better to be succinct, concise and specific. That is, laconic. You can use a visu or a skaldic spell. You can remake a classic spell, of which there are plenty, or a chain mail spell (available online). When applied to paper, the spell can be written on the reverse side, you can even write it in runes.

From myself: Also, activating a rune with the name of all the runes in a band rune or runescript greatly specifies the action of the stav.
When charging runes for mantika, it is important to say the following. For example, we take the Ansuz rune and tell it “Now you are the Ansuz rune, the rune of this and that, meaning that...” That is, it is important to build a “bridge” between the rune and a specific die with the rune.
It is also recommended to add a phrase at the end: “No harm to me and my loved ones” or “No harm to health.”
Also phrases that concentrate your intention, like: “So be it!” (Scandinavian analogue (one of the options
pronunciation) "How much faith!"). Or “The gods heard, the spirits heard, the ancestors heard!” (The gods said, the spirits saw, the ancestors heard), or “The gods are witnesses of my witchcraft!” etc. and so on. There are many options here.
You can also add the word “ALU” at the end (which by the way means “beer”, the sacred drink of any holiday) or something else a short word(preferably having a sacred meaning).

Activation methods.

Activation

a) Activation by burning. IN in this case we take a sheet of paper, apply the stave, slander it, drip it with our blood, burn it... During burning, the information and charge of the stave move from the physical plane to the spiritual, and so the stave begins to act.

b) Fire activation. Carefully carry the photo (runes to the flame) over the flame of a candle (preferably a wax one), take it just above the flame, otherwise the photo may completely ignite. If activated correctly in this way, a thin shiny film should form in place of your runic file, ligature or stav; if you turn the photo towards the light, you will see how it glitters.

From myself: on the die I activate it like this, specify it, pour it on with cologne (alcohol, cheap), set it on fire, ask for a flame
for help, I'm extinguishing. It is better, of course, to pour cologne into the grooves, but this is not always possible.
We leave the ashes in the fire, or scatter them in the wind if we burn them in other ways. If this influence is on a specific person, it flutters in his direction, where he is supposed to be.

c) Air activation. To activate becoming the power of air, placing your work in a smoking fire (to make such a fire, you need to gradually add raw (fresh) herbs or raw leaves into it. When your fire begins to smoke a column of white smoke, then put your work in it, and let it be fumigated with this smoke and gradually decay to the ground (Air signs interact well with the element of air, pay attention to this)
From myself: at home you can take a sprig of dried herbs, light it and extinguish it (so that it smolders), and pass it under a stave with a hex to fumigate it with smoke.

d) Activation by breathing. You need to take in more air into your lungs, warm it inside, close your eyes, formulate a thought, an idea for the work of the stave, and, as it were, exhale this idea with the air on the stave. You can first breathe on your hand, then apply this hand to the stave.

d) Activation with candles. You did it, slandered him. Place candles on it (I recommend tablets, that is, round tea lights), repeat the instructions, and leave it overnight. The number of candles is taken either from numerology or from the number of days in the week, for example, we turn to Odin and take 3 or 9 candles.

f) Contact method. This is enough traditional way. Previously, most staves had to have direct contact with the object of influence, whether it was applying saliva to a hand for a handshake or being embedded in a footprint.
When you do it for yourself, putting it under your pillow, this is also a kind of contact method, only you (or the one to whom it is placed) are the object.

g) Activation by intention. Intention is a complex concept. This is a readiness to take an action, a jerk, when you are already taking a step with one leg, but have not yet stepped on it. If you control your intention, then it is enough to “pass” it through becoming. The main thing is not to think, but to do. When you think, you doubt, you are distracted. Just don't think, just do it. Concentrate on creating a stake and on the result. Speaking out loud will also help you not to think.

It is useful to speak of this as a completion. "I don't, I did." That is, words must express an action that has already been completed.

h) Activation through visualization. In this method, you don’t have to create the material at all, or apply it to the carrier. You imagine mentally becoming where he is needed. Mentally charge it and release it. Visualization must be directed correctly. You must present the object to be visualized. For example, if you need to influence a person, then imagine a burning flame on his body; if you need to help in court, mentally imagine a court or a situation that
brought there (like a static picture) - and mentally draw yourself there. But it’s best if you mentally hold the position first and verbalize it to yourself, or use the same intention. And then you release it at the target.

On a personal note: you can also visualize a finished fire, for example, you put it on paper and imagined that it lit up. This way you will give him additional strength.

i) Activation through meditation. You also need to be able to meditate on standing. In this case it is not just contemplation.
You feel becoming, he guides you, pulls you along, you follow him. And you feel how he invades the current situation and changes it. In this case, it’s as if you become a stake yourself.

j) Via connection. Any sign is also a source. A source of change of sorts. You can connect to it and use its energy to change the situation. For example, you need a certain energy that you don’t have, and becoming this is both a source and a filter. Join him, as it were, and pass your energy through him, so that by becoming he changes it the way you need. This method is similar to meditation.

k) Activation through photography. This method acts like a contact method, only instead of a specific object it takes
his photograph. This method is not as strong as open contact. Becoming can be applied to the photo and removed from view
places. You can put the subject's hair or fabric from his clothing (or any personal item) on top.

Application:
Depending on the goals of the stave.
Paper, your body, die, bone, stone, leather, cardboard, other dense medium.

Important: you can combine several methods, but the main thing is not to overdo it. Don't make it too complicated. If at
activation by your Personal Power, you feel weak, then on the one hand this is good - the process has begun, on the other - bad, there is not enough energy or you have given a lot to the staff. I advise you to use breathing techniques to gain energy before activation. For example, holotropic breathing. It will also put you into a trance.

3) ritual

a) Ritual methods of activating stavs include, for example, combining sacrifice and activating a stav.
For example, we take a rooster or a chicken, bring it to the gods, the sacrificial blood should not touch the ground, you can take
glass and pour it into it. Then sprinkle this blood on the stand or pour it into the hollows of the runescript (if it is carved on a die). This type activating the stav does several things at once: we have an offering to the gods and blood for the die. Of course, here you need to be able to bring the animal correctly, so that it does not suffer, is ready to go to the gods on its own, and its meat should be eaten no later than a day later. You can “talk” to the animal, whisper to it what it should convey to the gods and what it should ask for.

b) The method of activating runes by all the elements (the most probably known method) is also a kind of ritual. You can add blood to the 4 elements.

c) Through the altar. If you have a ready-made altar, then it already contains your energy and the energy of the forces with which you work. It is enough to draw a stave, write a disclaimer on the reverse side and place it on the altar. Then it will start working on its own.

d) Through spirits. You make a stave and combine it with a mini-ritual of summoning. For example, you know and work with certain spirits. You call them and ask them to charge and/or activate them and get to work. For example, you can do this. You take it on a piece of paper and write your request at the back. Place a bun with a candle stuck into it. You can put a suitable Tarot card under the table (I usually also put the High Priest Card, which builds a bridge between
the divine world and the world of people). You can put offerings. Next you call the spirits. Usually they are called by name; without a name it is much more difficult to call them. say your request out loud. Leave it overnight at the door or window, or on the altar.
In addition, you can also put defiant staves. You can also leave it at an intersection (but this is already dangerous).

e) Through fetches, ancestral and other spirits. In this case, everything is similar, only as offerings you put what your spirits love more. If you appeal to your ancestors, then this is what they loved during their lifetime.

4) my methods.

a) Informational. This method starts with visualization and is suitable for “seeers.” For example, you made a position, stipulated it, then imagine that where the rune lines go, there is a hole in space. For example, you do it by betting on money. Knowing that the color of money is green or gold, you put this energy into the slot. Next, you must imagine how you can get this money and put this information into the slot. Then you “let go” of becoming and it starts working.

b) Through an independent source. If you are tired and you do not have the strength to activate becoming yourself. Can be done through an independent source. for example, you stipulated a stave and placed a miniature Hammer of Thor on it, or under an idol. Any Power item will also work. It is best to leave a note with a request, or write it to back side. You can also put herbs, fragrant mixtures, etc.

There is also a way to extend the validity of the bet if it is on the die. If the action fades before the scheduled time, talk about it again and lubricate it olive oil. Or bear fat, if you have it."

Do you want to direct the events of your life in better side, achieve your goals in any area of life? Then this article is especially for you! Here the reader will learn how to activate runic formula and other useful materials on the topic.

What are runic formulas for?

The main task of runic formulas is a targeted positive impact on the life of a specific person. Correct activation of runic formulas is the key to success in work, personal life, and financial sphere.

Exclusive bonus! If you are interested in Runes, you will definitely like our free mini course "Secrets Hidden in the Runes" ← Learn the features in 4 lessons safe work with runic energy, how to use the Runes of Health and Wealth, and...

More detailed information You can learn how to compose and spell out runic formulas by taking courses from specialists at the Russian Tarot School.

Let's consider the principle of creating formulas from Slavic runes on some examples.

3 Fehu: The combination will help you move up the career ladder and start earning more money
Ansuz - Uruz - Yera - Ansuz: This formula is what you need to attract good luck for new beginnings
Dagaz - Inguz: Symbolizes longevity, excellent health
Teyvaz - Uruz - Gebo: Most often used in the love sphere
- Gebo - Otala: Strengthens marriage, allowing you to improve relationships with your spouse
Laguz - Ansuz - Uruz - Kano - Ansuz - : Protect from evil, negative magical influences a combination will help
Turisaz - Teyvaz - Turisaz: Another version of the protective formula (will help if you need to communicate with unpleasant people)
- Uruz - Dagaz: Makes the owner attractive in the eyes of female representatives

Why do you need to activate the runic formula?

Activation of runic formulas is a process that allows you to customize runes for a specific person. This could be assistance in a certain matter, encouragement to a certain type of activity, assistance in love relationships etc.

Before starting work, you should activate not only the rune set, but also the pouch in which they are located.

Important! Never purchase runes from a person involved in runic practice. It’s better to make them yourself or buy them in a store! The set is activated once

A runic formula is a combination of runes in a certain sequence, which is activated for a period of two months. After this period, the formula should be disposed of (bury or burn). If there is a need to repeat the ritual, the combination is drawn again - to do this, activate it again.

How to activate a runic formula with breathing

How to activate a runic formula with breathing? Very simple! Close your eyes, formulate the ultimate goal of the work, then type maximum amount air into his lungs, mentally warming him inside. Exhale on the drawn combination of Scandinavian symbols. You can breathe on your hand and then place it on the runes.

Activation of the runic formula by fire

Before activating a runic formula with fire, prepare its image on a photo (sheet of paper). Bring the object to the flame of the wax candle so that the drawn runes touch it. Make sure that the formula does not catch fire, otherwise all the work will go down the drain.

Note! If you did everything correctly, a shiny thin film will form in the area of the runic combination, which is clearly visible against the light

How to activate a runic formula with blood

Many people wonder how to activate the runic formula with blood and why it is necessary. This type of activation is carried out in two cases - to strengthen the owner’s connection with his rune set and to work on healing.

Note. To avoid trouble, do not use this type of activation in other cases of composing runic formulas

Before starting the procedure, prepare a twig (you can use a toothpick) and a knife/needle (this will help pierce the skin). Take blood from ring finger left hand, since an unskillful cut of the wrist can be fraught with disastrous consequences.

Note! The items you use to pierce the skin must be completely new. To avoid infection, arm yourself with hydrogen peroxide or alcohol

After piercing your finger, dip a twig or toothpick into the blood and circle all the runes of the formula one by one.

Activation of the runic formula using 4 elements

Before activating the runic formula using the 4 elements, take care to prepare the following components.

Dry herbs (immortelle, chamomile, yarrow, amber). Necessary for fumigation, can serve as incense. Choose herbs that do not cause dissonance of perception
Wax candle. The color of the product depends on the area of life that is planned to be affected. Business success, wealth, prosperity - green/red, healing - blue, interpersonal relationships - pale green/pink
Salt. Choose only large rock salt, without additional additives
Water. Pour the liquid into a glass container (preferably a glass). Before activation, it must stand in it for at least three hours.
A piece of fabric made from natural materials

Air Activation

The beginning of activation is working with the element of Air (similar to the breathing method described above).

There is another way - light the prepared herbs, wait for a while, and then extinguish them so that you get smoke. It is necessary to fumigate all components of the runic combination with smoke, formulating a mental image of the final result.

Attention! If you don’t have a fumigator, you can use a regular tablespoon to create smoke.

Activation by Earth

Activation by the elements of the Earth. Take the prepared piece of fabric, wrapping it around the image of the runic combination, take it to the forest, and bury it. After half an hour you can tear off the runes.

Activation by Water

Activation by Water. Dip the selected combination of runes into a glass container, wrapping it in cloth. After half an hour, take it out.

Note. This activation method is suitable for metal, wood or stone on which a combination of runes is engraved

Activation by Fire

The Fire activation method is similar to the above (see above).

Important! Any work with runes requires maximum concentration and calmness - this will help you quickly tune in to the desired result. Carry out the procedure completely alone (cats are an exception)

How to activate the runic formula on the body

How to activate the runic formula on the body? It all depends on what it is applied with. If you are using a pen, activate each symbol with your breath (the ritual is listed above). When the symbols are erased, you can draw them again by repeating the activation procedure. In a situation with the use of aromatic oils, the specified activation is required after each application.

Activation of runic staves through meditation and visualization

There are situations when runes can not be applied anywhere at all. Use combination activation through visualization. Imagine the place where you will apply the selected combination of runic symbols, mentally charging it.

With this type of activation, it is very important to correctly imagine the object of visualization - it all depends on the sphere of life activity that is being affected.

Activating staves through meditation is quite difficult. Indicated for people with developed intuition, good imagination, presence spatial thinking. You must not only imagine the runes, but also feel all their depth, power, and strength. Imagine that the formula is leading you, like a guide, invading a situation that requires change. Merge with the symbols for a few minutes. The main thing is not to overdo it.

Leave comments, stay tuned, and you will learn a lot more interesting information. Peace, good luck to you.

Do you want to learn how to safely use Runes to achieve your goals?

The energy of Runes can be used to accelerate the realization of what you want in all areas of life: Health, Relationships, Career and Finance. But in order for interaction with runic energy to be safe and you get the intended result, you first need to master the necessary basic knowledge of proper operation with Runes and understand the principle of operation of runic energy.

You can get this knowledge at free mini-course “Secrets hidden in the Runes”.

Questions from newcomers poured in, are pouring in and will continue to pour in, and they are all of the same type. Therefore, this is another article among many other articles, other practitioners, which will answer the typical questions that all beginners ask. Where to put runes? In fact, you can apply runes anywhere; the runes, in fact, don’t really care what you apply them to, because the runes work by intention, only the operator needs the base to make the work easier. But there are some exceptions to this rule, when it comes to talismans/amulets, then the base will matter based on their nature of material. There are several popular carriers for staves:

Photo is the most popular base for application. Which photo to choose is the one that seems suitable to YOU PERSONALLY and helps you in your work. If the effect is on one person, and the photo is group, it is better to remove all other people and animals from the photo in any available way (cut with scissors and paste on white paper, cut in Photoshop, erased in Photoshop, painted over, etc., etc.). ANY studs can be applied to the photo (unless otherwise specified by the author in the description of the staves). All bets are applied on the front side

Cucumber - if there is no photo, you can use a schematic image of a person, which practitioners call a “cucumber” (from “stick-stick cucumber, here comes a little man”), you can give it the features of an object, you can add the name, date of birth and any other information on operator's discretion. ANY studs can be applied to the photo (unless otherwise specified by the author in the description of the staves). All bets are applied on the front side

Description paper- most often, statements aimed at a situation or statements that for some reason should not be applied to a photograph or cucumber are applied to paper with a description. All bets are applied on the front side

Body - temporarily (with a pen, felt-tip pen, cream, oil, saliva, etc.) you can apply any staves (unless otherwise specified by the author in the description of the stave) aimed at affecting the subject on whom the stave is drawn, or staves aimed at situations and other objects , associated with the subject on whom the stave is applied.

I have a good attitude towards runic tattoos, but nevertheless I do not recommend them for beginners, since in order to get a tattoo you need good diagnostics, a master who can apply a tattoo under certain conditions, the ability to work with runes and staves, individual selection and preliminary tests in the form of temporary application for a long period, etc., etc. It is traditionally believed that staves that affect the subject himself are applied to the left side, and staves that affect others are applied to the right side. Practitioners choose the location of the stave on the body independently, some draw in such a way that the top of the rune is directed towards the head, some vice versa towards the legs, some sideways - everyone is looking for the method that will work best for themselves. The visibility of the stavs on the body is not important (unless specifically indicated by the author in the description), only the hassles of direct impact (= action only when the object saw the formula) should be located in a visible place. An alternative to applying it to yourself is to apply the stav to a patch and attach it to the body.

Items - various stakes that will be used as linings, tosses, etc.

Cosmetics, creams, shampoos, etc., etc.- focus on beauty, health

Water, tea, liquids, food, etc.- bets on beauty, health, bets that will be used as drink, feed, gravy, etc.

Various materials- any natural materials can be used, based on their magical and energy properties, suitable for the tasks of the created talisman/amulet. Typically, long-term or repeated exposure stains are applied to such media, simply because it is more difficult to apply to metal, stone, wood, etc. than to paper, but if the operator wishes, absolutely ANY stains can be applied to the media (unless otherwise specified by the author in the description of the stakes). The only difficulty in working with bets on such media is because... the work is carried out in two related areas of magic (graphics + talismans) - the need to observe various subtleties and calculate the time, moon, days, etc., etc., inherent in the technology of making talismans, which can be avoided when applying runes to other media. To check the functionality of a long-term formula, you can first activate the stav on paper (without a photo, cucumber, signature) and use it as a talisman; if the stav works satisfactorily, the stav is transferred to a permanent medium.

Volt - volt is used in runic magic ONLY if there are connections to the object of influence (biomaterial, things). If there is only a photo of the bindings, creating a volt is pointless - the staves are applied to the photo. Before applying staves, volts must be created and animated according to the rules.

Candles - ANY staves can be applied to candles (unless otherwise specified by the author in the description of the staves) of short duration (while the candle is burning) and which need long-term feeding with the energy of fire. As well as staves for recharging other staves through a candle. The back of a photograph, a cucumber, any other medium, a separate envelope, box, etc. - unless otherwise specified by the author in the description of the staves, staves are applied to conceal the impact, blindness, fastening and protection for work, energy, accelerators

How to apply runes?

Whatever you want. How convenient. What do you like? Any colour .

PRINT OR DRAW BY HAND? Ideally, all bets are placed by hand, regardless of their complexity. This shows how important the operator is to what he does and what he wants to get and how invested he is in the process. Small staves (up to 10 runes), which are simple and easy to disassemble, as well as staves that definitely need a runic clause (unless otherwise specified by the author in the description of the staves), it is better to draw by hand. Large and complex staves and ligatures can be printed on a printer (unless otherwise specified by the author in the description of the staves) and then traced along the lines (hint: take a marker with a thickness of 0.1, then any even super-thin lines will be drawn accurately).

HOW MANY STAKES CAN BE APPLIED AT THE SAME TIME? Yes, at least three hundred. If you pull, and if there is no conflict between them. Experience says that it is extremely difficult to connect more than 7 bets on one target on one object/situation so that they do not interfere with each other, do not conflict or spoil the impact, and then this complexity increases in geometric progression, that is, by about the 11th hour it is already practically impossible. The principle in quantitative selection should be “less is better”; it is better to place 1-3, maximum 5 bets on solving one problem than to put a lot. For one medium, no matter what it is (photo, cucumber, talisman, etc.), it is better to install one post plus, if necessary, one additional post on the back (see above, which posts are placed on the back).

How to activate runes?

Each practitioner chooses for himself the method that suits him best and as a result of which he receives top scores. A beginner has no choice but to try and experiment with different ways activation to understand and find one that will work the best way. If any special activation method is indicated in the description of a formula or stav, you must use this method or select another formula or stav,

There are several popular activation methods:

By fire - activation by fire is NOT activation by burning! When activated by fire, the carrier with the stave is held over the source of fire, filling it with the energy of this element, but is not burned. If during such activation the stave itself was accidentally damaged (a piece of the stave burned out, a hole formed in the stave, etc.), the stave must be deactivated and reinstalled, handling fire more carefully.

By burning - used for staves that do not need to be deactivated. Where to put the ashes after burning - throw them into the wind, into a river, the sea, bury them, etc., etc. You definitely shouldn’t throw it down the drain or in the trash.

Elemental activation- you can do it all, you can do it several, at the discretion of the operator. When activated by the elements, the wearer with the stave somehow comes into contact with the elements being used.

Breath activation- can only be used for positive bets. You cannot activate porcel staves by breathing. It is not recommended to activate staves for others with your breathing that are not aimed at a joint action and at the operator.

Activation by blood- can be used ONLY for positive bets. It is not recommended to activate staves for others with your blood that are not aimed at a joint action and at the operator. There are beliefs circulating online, bordering, in my opinion, on trolling, that since the primary sources indicate that damage was done with blood, it is possible to do so now. Such information is indeed in the primary sources, but it is important to remember several points: 1) the eddas, sagas and legends are not a textbook on magic with all the details and subtleties of work, 2) the information in the primary source could be distorted in order to give greater power to the images, in order exaltation, as well as due to ignorance or deliberate confusion 3) time is running forward, we are gaining experience and knowledge, not only in the exact sciences, medicine, physics, etc., but also in magic, what was normal and natural for the 1st century AD is not always also normal and natural for the 21st century, it is necessary to move forward, and not degrade, denying experience, knowledge and real consequences from any actions.

Activation by intention - mental activation without the use of any other means, requires great skill and skill in working with intention.

Activation by time - it is stipulated that it begins to act at a certain moment or at a certain time. In addition to these methods, you can choose any other that seems acceptable to the practitioner and which brings him results.

How to deactivate runes

Deactivation of the stave (unless otherwise specified by the author in the description of the staves) can take place in any way convenient for the operator, based on the material of the stave carrier and the method of applying the stave, which MUST be specified upon activation. There are several popular deactivation methods:

Is blood needed? Saliva? Another biomaterial for activating runes?

Staves need blood, saliva and other biomaterial ONLY to bind to the operator (or to mark an object). Using blood in staves is NOT a sacrifice or gift to the runes! Such a binding is often necessary in double-direction spells (love spells, egilettes, sugar spells, etc.), where it is necessary to indicate specific goal object or subject. They use their blood, saliva, and other body fluids only in actions where the operator himself appears. For others they do not use their own biomaterials. Their biomaterial is not used in damage, lapels, curses, or any other negative impacts, other people's protection (including relatives), other people's purges (including relatives), influence on third parties. I personally prefer the use of live blood (from a vein or artery) to all other biomaterials (hint: to draw blood, quickly and least painfully - use thin medical syringes or insulin injection needles for diabetics - they have a minimum needle diameter, it is easy and simple enters any place without leaving traces). Blood can be taken from any place, from any finger, from any part of the body (unless otherwise specified by the author in the description of the staves). It is also possible to use saliva, sperm, menstrual blood, etc.

So, you have decided to engage in runic art. You bought yourself a runic set and prepared well theoretically. But what next? What steps do you need to take to start working with them? Any experienced runologist will tell you that first you need to activate them. And only after that you can start practicing.

What is rune activation? Why is it needed? Any person who is interested in runes and wants to work with them buys himself a runic set. But before you start using them for their intended purpose, it needs to be charged and activated. Otherwise, the runes will not work as they should. Activation of runes is therefore one of those rituals that a beginner in runic art is introduced to. At the same time, the process of unifying human energy with the runes occurs. This contributes to a better understanding of runes. After all, behind all these signs there is a certain element, a certain deity. This is a whole small world with its own characteristics. And you need to know it in order to be able to use it.

Rune activation ritual

Now we’ll find out how to correctly activate a runic set. To do this, you first need to place objects on the table that will represent the elements of Earth, Fire, Air and Water. Accordingly, this will be a bowl of salt (coarse), a burning candle, incense and a vessel with water. All vessels must be thoroughly washed before the ritual. Use the new one for the ritual wax candle, that is, pure energetically. As for incense and incense sticks, place them on a stand in a vertical position. The symbols of the elements should be arranged like this: in the far left corner of the table - Fire, in the far right - Air, in the near left - Earth, in the near right - Water. And the center of the table will be intended for a runic set. It must be new. Do not use other people's runes under any circumstances. They should only be yours.

To perform the ritual, make sure that there is no one in the room: no other people, no pets. Turn off your phone (or at least put it on silent mode). In general, it’s better to lock yourself in the room from the inside. So the ritual begins. It is necessary to recharge with the energy of all four elements. To do this, you need to touch each of the symbols in turn or light it (candle, incense). At the same time, say the phrase: “I call upon the elements (Earth, Fire, Air, Water) into this circle to help me.” Your words should come out loud and clear. Now it's time to place the Elder Futhark runes in the center of the table. Moreover, the layout should be like this: three rows of eight runes each. The first row in turn from left to right will look like this: Fehu, Uruz, Turisaz, Ansuz, Raido, Kenaz, Gebo, Vunyo. Second row: Hagalaz, Nautiz, Iza, Elvaz, Pertro, Algiz, Soulu. Third row: Tivaz, Berkano, Eyvaz, Manaz, Laguz, Ingvaz, Dagaz, Otala. But the Odin rune should be placed in the fourth row in the center, below the other runes.

Now you need to focus on the runes, look at them carefully. After this, the activation of all runes begins in turn, starting with Fehu. To do this, take a rune and say its name (you need to know them by heart). Then we lower it into a container with salt and at the same time say the words: “I activate the Fehu rune with the energy of the Earth Element!” We pronounce the same words (only with a change in the name of the element) when we hold the rune over the flame of a candle, when we bring it to the incense, when we splash water on it. Now we take the rune in our left hand and say: “The Fehu rune is activated by my breath! Fehu, become mine and help me!”, while blowing on her through his right hand, folded into a tube. The last step should be repeated three times. And only then can the rune be put into the bag. All the same actions are performed with the remaining runes, including the Odin rune, which lay at the very bottom. By the way, you can change the pronounced words. The main thing is that their meaning does not change.

Now press the bag with the runes to the sternum (heart), close your eyes and imagine that now you and the runes are one. It would be nice to say “thank you” to the elements for their energy, for their help in implementing the ritual of activating the runes. You can extinguish a candle only with your fingers; extinguish incense with water. All items that took part in the ritual must be removed immediately. After such a ritual, the rune reader must mentally promise himself to use the runes according to all the rules, not to give or give away his set to anyone. Thus, you will betray your runic set. And this can be fraught.

The entire ritual involves several forces at once. That is, the runes are simultaneously activated by fire, water, air and earth, as well as the runes are activated by the breath of their owner. This is all very symbolic: all forces have gathered to help the rune reader. But he himself is directly involved in this. Now your hands are untied. Now you can work with runes. Now they are completely at your disposal.

Here are some tips that may come in handy during the ritual:

Some authors and experienced rune scholars say that there is also activation of runes with blood (this can be included at the end of the ritual described above). The meaning of this action is the unity of a person with the runes. After all, blood is a symbol of kinship, close connection, sacred unity. Of course, use this biological fluid or not, it's up to you to decide. If you decide, you will need to injure one of the fingers and squeeze out a few drops of blood. Of course, there is no need to smear the runes with it. It is enough to hold them over the blood. However, not all rune experts recommend using blood. They think it's too theatrical and fake. Perhaps there is some truth in their words.

It is worth mentioning that there is no need to neglect the ritual of activating runes. This is not some useless fun. It's worth taking this seriously. It would be good to read more about the activation of runes in specialized literature. There are several types of rituals, but their essence and purpose is the same: to charge the runes with your own energy in order to feel them, so that they obey you and help you.

Runic activation. Blessing of runes with the elements of the earth.

Without proper knowledge how to activate runes That's right, you won't be able to use their wonderful magic. And no matter how you ask for help - ancient symbols will remain inaccessible to you. Activation of runes is a special procedure during which the signs used are tuned to a specific job and exchange energy with a person.

Before you start this process, you must have with you a certain set of artifacts and, of course, knowledge. You can get them from special sources or ask for advice from a professional runologist.

Remember that working with sacred elements is not a game or fun. Learn what runes are, how to activate them, and. If you don't take them seriously, you risk getting what you deserve.

Article on the topic:

Ways to activate runes

So, getting started magical ritual, tune in to a positive mood. Drop all negative thoughts and emotions. Believe that everything will work out for you.

You need to activate the entire rune set, and not just those symbols that will be used most often. The procedure is carried out only once - this is quite enough for rituals and fortune telling.

If you were given a rune talisman, it also needs to be properly activated. The same goes for tattoos. The usual one (in the form of stav or ligature) will not give you the desired effect.

There are several ways to activate runic signs - they are not complicated, but they require attention and serious attitude.

Here are the main ones:

using your own breathing;
using the internal energy of a person;
method using natural elements;
destruction of the formula.

And whatever method you choose for yourself, the procedure should begin with the words: “I activate the runes with natural energy... (indicate the force used).”

How to activate runes on paper

Plain paper is an affordable material that is always at hand. It can be used to activate sacred signs. Draw the required formula on one side and write your personal information on the other.

After this you can apply any convenient way activations:

if you want to change your life for the better, use the four elements method;
if you have conceived a grandiose plan and are completely confident in it, the method with fire will do;
if you need help with your health, the best option- ritual with blood;
and the breathing method is suitable for those who want to attract good luck, money or social respect.

Next, fold the piece of paper into a small envelope and do not part with it for sixty days. After which you need to bury it deep under the roots of a young fruit tree or burn it in a fire.

Be sure to thank both the symbols and the Universe for your help.

It is quite possible that after the ritual you will feel some fatigue or dizziness - this is not scary. These are just signs that you have lost some energy. Now we need time to recover. A couple of days will pass and your condition will return to normal.

Activation of runes on the body

By depicting runes on the body, people expect protection or other protection from them. magical help. But not everyone knows that to begin with, all symbols need to be correctly activated. You should know exactly how to activate the rune formation that the tattoo depicts.

Runic marks are applied to the body using a pen, paint or aromatic oils. Some also use tattoos - this is a more serious way.

It is best to activate the rune on any part of the body with your breath. If this is physically impossible to do (for example, the drawing is on the back), then you will need a glass of water.

Say while standing over him:

“I ask water to help me strengthen the magic of the runes on my body.” .

After this, drain the glass to the bottom.

How to activate runes with fire

This technique is very powerful. If you spend it, there will be no turning back, so think several times about what exactly you want to take from the runes.

Draw the required signs on a piece of paper and place it under your own pillow. Store the drawing in this place for three days. Do not look under the pillow during this period - do not violate the sacrament of the ritual.

Then take the runes and go to forest clearing(or to any secluded place). Build a fire there and burn paper with thoughts of what you want.

Do not put out the fire under any circumstances! The fire should burn out on its own.

If you don’t have the opportunity to make a fire outdoors, you can use a regular candle. But know that after such a ritual you will need long time to restore energy balance.

Activation of runes by elements

To perform this ritual you need to prepare in advance:

Air.
You will need a set of dried herbs. Commonly used are chamomile, helichrysum, frankincense or yarrow. Fire
. You can’t do without an ordinary candle. Its color depends on your desire. If you are looking to attract good luck, use a red candle. If you are concerned about health problems - blue. Pink is suitable for solving love issues. A white candle is considered universal. Earth
. Stock up on a pack of salt.

Place cards with images of runes and all prepared items on the table.

The first stage is activation using the air element. Light the herbs and let their aroma spread throughout the room. Pass the smoke over each symbol and say:

“I activate the sacred formula to make my wish come true.”

The second stage is activation by the element of Fire. First, light a candle. Pick up the runes and hold them over the light. And make a similar disclaimer.

At the third stage we use the power of the Earth. Pour a handful of salt onto each rune sign, and direct all your thoughts to what you have planned.

The last fourth stage - the runes are activated using the water element. Apply pre-prepared water to all objects and symbols. If you don't use all the water, you can use it to water indoor flowers or trees in your garden.

Remember important rule:It is strictly forbidden to take water for the ceremony that has been blessed in the church.

How to activate runes with breath

This is probably the easiest and affordable way. And also very fast. It is suitable for any person, but remember the main thing - this technique is used only in...

How to correctly activate runes using your own breath? Let's figure it out.

Place it on your left palm rune, amulet or runic stave and cover on top right palm. Inhale as deeply as possible and exhale into the folded box from your hands. Mentally visualize everything you want to ask the symbols for.

If you wish, make a reservation during the procedure. For example, the following words would be suitable:

“I activate the runes so that my body can heal from an illness. I ask for protection from all evil spirits and other harmful entities."

Activating runes with blood

The following method is carried out in two cases:

to strengthen health and internal strength;
to cement the energetic union of the runic set and its owner.

If you are going to use runes for other purposes, it is better not to use blood activation - this is a very serious rite that has a number of consequences.

Prepare a sharp twig in advance (a regular toothpick or a sharpened match will do). Also, you cannot do without a knife with which you will need to make the cut. Blood is taken from the ring finger. Professional runologists cut the wrist, but it is better not to risk it - you can significantly damage the vein.

To protect yourself, wipe all items with alcohol.

This method will help those who want to know how to correctly apply runes on a photo and activate them. If you want to bring healing to a loved one, then draw symbols on his photograph and follow the instructions.

When you prick your finger and the first drop of blood appears, dip a wooden stick into it. And then draw a circle around the runes.

When the blood dries, you can wipe it off.

To strengthen magical effect, say the following phrase:

“I call on the runes to help me and make a sacrifice to them.”

How to deactivate runes?

The deactivation procedure is almost identical - the natural power of the elements is also used here.

Most often, magicians perform a ritual with water - just hold the rune signs under a stream of water. Actions are supplemented with a reservation.

Deactivation by earth occurs as follows: the rune or rune stave is buried underground. Over time, the energy of nature takes away the power of the symbols and purifies them.

The fire element also cleanses everything in its path - hold the formula over burning flames for a couple of minutes.

Alena Golovina— white witch, master of Cosmoenergetics,author of the site

Interesting